Felix Storch Tec 4.0 to Tec 4.1 Upgrade Kit Upgrade Manual
www.felixprinters.com
FELIX Tec 4.0 to Tec 4.1 Upgrade Kit
For Both Single and Dual head 3D printers
In the box
Upgrade manual
v 1.0
Tools:
Chapter: Preparing Upgrade
10 Minute s
3
Remove front cover
1.
Remove cable ties
2.
Tools:
Remove sleeve from cables.
3.
Remove Z-sensor by removing nut.
4.
Tools:
Remove LED Strip carefully
with tweezers.
5.
Tools:
2
www.felixprinters.com
Caution, be carefull
2
2,5
5,5 mm 17 mm
17 mm
(2x) Remove M4 x 40 bolt.
Tools:
3
6.
Remove Front Bracket
7.
Lower extruder / fan bracket
8.
Unplug motor cables
9.
Write on each cable the corresponding motor number.
LEFT: 0 RIGHT: 1
10.
Disassemble RIGHT fan assembly.
Remove ī “nger guard and fan duct.
11.
Tools:
2,5
3
www.felixprinters.com
Loading...