Profile: Overview / Security / Location / Alarm / Family / Notifications / Settings / Sharing / Help / Alexa / Google / About .............7-13
On /Off / Schedules.....................................................................................................................................................................14-15
Siri Shortcuts..............................................................................................................................................................................29-30
Google Assistant.........................................................................................................................................................................35-37
NETWORK CONNECT AND APP SETUP
1
Connect to a 2.4GHz
2
Register
3a
Privacy Policy
Wi-Fi Network. Download and
install the Feit Electric App
NOTE: Only works with 2.4GHz Wi-Fi networks
Wi-Fi 2.4GHz
Wi-Fi 5GHz
Go to your Wi-Fi settings and connect
your phone to your 2.4GHz Wi-Fi network.
Tap Agree.
3b
Download and launch
the Feit Electric App
1
Tap Register to create a new account
or Tap Log in if you have
an existing account.
Returning users Log in and skip to step 10.
APP SETUP
4
You may use an email or mobile
(A verification code will be sent
to your email or mobile number.)
Register
Continue
Continue
number to create an account.
Then tap Continue.
56
Verification/Password
Enter Verification Code sent
to your email or mobile number.
Done
Create a Password then tap Done.
Permissions
Allow Bluetooth
(Recommended).
Allow Notifications
(Highly Recommended).
2
APP SETUP
7
Location Access
You must Allow Feit Electric App
to access your location to
connect to your device.
8
Name Location
Name Location
1
1
Enter your location name.
2
Check where your device is located.
3
Tap Done.
3
2
9
Confirm Home Added
Tap Done or View Home
for location settings.
3
SMART PLUG SETUP
4
1
your Smart Plug(s) before proceeding.
Add Device
IMPORTANT!
Install and Power On
Tap + in the upper right corner
NOTE: If this is the first device you
are setting up, you can also
select Add Device.
112
Add Outdoor Plug
Indoor
Plug
Security
& Cameras
Controls
& Sensors
Tap Plugs,
then tap Indoor Plug.
123
Confirm Pairing
Indicator light on indoor plug must be
rapidly blinking to connect. If not already
blinking, press and hold the power button
for five seconds, then tap Confirm.
SMART PLUG SETUP
4
Confirm Wi-Fi connection
Wi-Fi 2.4GHz
After confirming that you are on a
2.4GHz Wi-Fi network,
enter your password then tap Confirm.
5
The connecting status window will appear.
Connect
Wait until it’s completed.
Troubleshooting
If you see a Failed to Add notification,
check to be sure your Wi-Fi password
was entered correctly.
Close the app and repeat the previous
steps to try connecting again or
View Help for further assistance.
5
SMART PLUG SETUP
6
Device AddedEdit Device Name
Once device is successfully added,
tap the Pen icon to rename the device.
6
2
1
Once device has been renamed,
1
Tap Save
2
then tap back “ ”.
Then tap Done.
Adding Additional Devices
Indoor PlugIndoor PlugIndoor Plug
NOTE: Constant power to the
dimmer(s) is required at all times.
To add additional deivces
tap the plus (+) sign
in the upper corner.
Repeat steps 2, 3, 4, 5 and 6.
PROFILE: OVERVIEW
Profile
From the Home screen
Tap Profile.
From the Control Panel you can access
features and control your flood light.
1
Tap to set your name profile photo, change password,
gesture password, close account
2
Location Management add locations
3
Living Room Plug
Message Center view detection alerts, Family and notifications
4
Share Devices share devices
5
Help Center FAQ’s, Network Diagnostics and Report Issues (Chat)