Page 1
USE AND CARE GUIDE
PORTABLE WORK LIGHT
WITH WIRELESS SPEAKERS
Model # AC6905
Item # WORK2400BT
Questions, problems, missing parts? Before returning to the store,
call Feit Electric Customer Service
8 a.m. - 5 p.m., PST, Monday - Friday
1-866-326-BULB (2852)
REV007
We appreciate the trust and condence you have placed in Feit Electric through the purchase of this LED Rechargeable Worklight. We strive
to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home
improvement needs. Thank you for choosing Feit Electric!
FEIT.COM
THANK YOU
Page 2
Table of Contents
Table of Contents ...................................2
Safety Information ..................................2
Warranty ..........................................2
Pre-Assembly ......................................3
Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
Care and Cleaning ..................................6
Safety Information
Read and understand all Safety and Operating instructions in this
manual before using this product.
Follow all safe guards stated in this manual, in addition to normal
safety precautions in working with electrical devices. When using
outdoor-use work lights, always follow basic safety precautions to
reduce the risk of re, electric shock and personal injury.
• Use only 3-wire UL listed outdoor extension cords that have
3-prong grounded plugs and grounded receptacles that accept
the work light’s plug.
• Use only with an extension cord for outdoor use, such as an
extension cord of cord type SEW, SEOW, SEOOW, SOW, SOOW,
STW, STOW, STOOW, SJEW, SJEOW, SJEOOW, SJW, SJOW, SJOOW,
SJTW, SJTOW, or SJTOOW.
• Ground Fault Circuit Interrupter (GFCI) protection should be
provided on the circuit(s) or outlet(s) to be used for wet location
tripod work lights. Receptacles are available having the builtin GFCI protection and are able to be used for this measure of
safety.
• Do not use with an extension cord near water, or in areas where
water may accumulate. Keep the work light at least 16 ft. from
pools or spas. Keep plugs dry. Only use this work light with GFCIprotected outlets when in wet locations.
• To disconnect, turn all control to the off (O) position, then remove
the plug from outlet. Do not unplug by pulling on cord.
• Do not insert foreign objects into this product.
• To reduce the risk of re, keep away from combustible materials
while in operation.
• To reduce the risk of injury, close supervision is necessary when
a product is used near children.
DANGER: BE EXTREMELY CAREFUL WHEN
USING THIS DEVICE. Improper use of this work light
can result in injury or death.
WARNING: Failure to observe the following
safety rules may result in FIRE, ELECTRICAL SHOCK,
OR INJURY.
WARNING: Changes or modications to this
unit not expressly approved by the party responsible
for compliance could void the user’s authority to
operate the equipment.
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation. Note: This equipment has been tested and found
to comply with the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more
of the following measures: Reorient or relocate the receiving antenna. Increase
the separation between the equipment and receiver. Connect the equipment
into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help. Any changes
or modications not expressly approved by the manufacture could void the user’s
authority to operate the equipment. Feit Electric Company, 4901 Gregg Road, Pico
Rivera, CA 90660. www.feit.com.
Warranty
LIMITED WARRANTY
This product is warranted to be free from defects in workmanship and materials for up to 5 years from date of purchase. If it fails to do so,
please contact the Customer Service Team at 1-866-326-BULB (2852) or visit www.Feit.com
2
Page 3
Pre-Assembly
SPECIFICATIONS
PRODUCT RECHARGING
Product Weight
Product Width
Product Height
LIGHT
Rated Power
Output
Color Temperature
LED life
Operating Voltage
STAND FOLDING ANGLE
Stand Folding Angle
Stand Rotation Angle
4.41 lbs
12.45 in.
6.9 in.
12.3 in.
30W
2400 lm
6500 k
> 50,000 hours
11.1v low voltage
0˚ - 60˚
<320˚
Battery
Charger Output
Charger InputProduct Depth
Charging Time
Battery Life
NOTE: The battery will not charge while the light
is in use. The battery level indicator will blink
while in charging mode.
FEATURES
Bluetooth Version
Speaker Power
USB Outputs (2)
Usage Temperature
Li-ion 11.1V 4400 mAh
DC 14V 4.28A
AC 100-240V 50/60Hz
4-5 hours
Light only- 2 hours
Music only- 50 hours
Light with music- 1.5 hours
4.2
3W
DC 5V 1 A
DC 5V 2.1A
-20˚c to 40˚c
PACKAGE CONTENTS
NOTE: Hardware not shown to actual size.
AA BB
Part Description Quantity
AA 1DC charging cable kit
BB 1Work light
3 FEIT.COM
Please contact 1-866-326-BULB (2852) for further assistance.
Page 4
Operation
BB
Adjusting the stand and lamp
1
TO ADJUST THE STAND
□ Loosen the knobs on both sides of the work light (BB) by
turning them counterclockwise. Rotate the two brackets
together and separate them to the desired position.
Tighten the knobs by turning them clockwise.
Bracket
Knob
TO ADJUST THE LAMP
□ Loosen the knobs on
both sides of the work
light (BB) by turning
them counterclockwise.
Hold the lamp handle
and move it forward or
backward to the desired
position. Tighten the
knobs by turning them
clockwise.
BB
Bracket
Knob
Knob
Handle
Turning the lamp head on
2
NOTE: Before using, plug the work light into
a 120V outlet to charge.
NOTE: As long as the work light’s battery has
a charge, the work light’s lamp and speaker
functions will continue to operate without
needing to be plugged into an outlet.
□ Press the Light ON/OFF button to turn on the light.
Press it again to turn off the light.
Light ON/OFF button
Bluetooth pairing
3
□ Press the Pairing & Speaker ON/OFF button to enter Bluetooth mode.
□ Press and hold the Pairing & Speaker ON/OFF button for 3 seconds until a Bluetooth activation tone is heard. The work light’s
Bluetooth mode is now turned on.
□ Turn on the Bluetooth feature of a phone. Search and connect to “Feit Work Light 001”. Press the Pairing & Speaker ON/OFF
button again for 3 seconds until a Bluetooth de-activation tone is heard. The work light’s Bluetooth mode is now turned off.
□ Press the Pairing & Speaker ON/OFF button to play and pause music.
Pairing & Speaker ON/OFF button
4
4:17
Pair new device
Device name
Pixel XL
Available devices
Feit Work Light 001
?
Page 5
Operation (continued)
Volume control and song switching
4
□ Press the Volume Up & Next button once to switch to
the next track. Press and hold the Volume Up & Next
button to increase the volume level.
□ Press the Volume Down & Previous button once to
switch to the previous track. Press and hold the Volume
Down & Previous button to decrease the volume level.
NOTE: Bluetooth and lamp functions do not
need to be used simultaneously. Music will
still play audio via the Bluetooth speaker
even if the lamp is not turned on.
Volume Down
& Previous button
Volume Up
& Next button
Recharging the battery
5
□ Recharge the work light by plugging one end of
the DC charging cable kit (AA) into the DC charging
port and the other end into a standard 3-prong wall
outlet or extension cord.
□ When the battery is fully charged, all three charging
indicator lights will light up blue. While the battery is
charging, the charging indicator lights will blink until
the battery is fully charged.
□ When not charging, press the power indicator button
to display the current battery level. The display will
automatically fade away after 10 seconds.
IMPORTANT: Use only 3-wire UL listed outdoor
extension cords that have 3-prong grounded
plugs and grounded receptacles that accept the
work light’s plug to recharge the work light.
NOTE: Only use the DC 14V 4.28A Kit charger
included with the work light.
The battery will not charge while the light is in
use. The battery level indicator will blink while
in charging mode.
Power indicator button
DC charging port
Charging
indicator
lights
Using the USB ports
6
5 FEIT.COM
Please contact 1-866-326-BULB (2852) for further assistance.
(USB cables not included)
□ The two USB ports can be used to charge two devices
simultaneously.
□ Plug one end of a USB cable (not included) into one
of the work light’s USB ports and the other end into a
USB-ready device.
NOTE: The USB voltages are DC 5V 1A and
DC 5V 2.1A. The total current is 3.1A.
USB ports
5V, 1A 5V, 2.1A
5V, 1A 5V, 2.1A
5V, 2.1A
Page 6
Care and Cleaning
CLEANING THE LAMP
□ Clean the lamp head, lens cover and lamp stand
regularly with a non-abrasive cleaner.
□ Do not use a spray bottle to clean the product
□ Allow the work light to cool down completely before
storing.
□ Store in a safe place, out of the reach of children.
□ Do not place or set product where it can potentially fall
or be pull into a tub or sink.
WARNING: Always make sure that the
product is off, not charging and cooled down before
attempting to clean it.
Troubleshooting
If the light does not work, check the following:
□ Ensure the xture is properly plugged into the
power source.
□ Check to see if the light goes on by pressing the
power button.
□ The battery may be depleted. Allow the work
light to charge for at least 5 hours.
WARNING: If cord/plug or product Is
damaged or malfunctions in any manner, return the
product to the nearest authorized electrical service
center for repair or examination.
Servicing of product requires electrical knowledge
and should be done by only qualied personnel. Any
replacement parts for the product must be identical to
those parts in this product.
6
Page 7
Page 8
Questions, problems, missing parts? Before returning to the store,
call Commercial Electric Customer Service
8 a.m. - 5 p.m., PST, Monday - Friday
1-866-326-BULB (2852)
FEIT.COM
SAVE THESE INSTRUCTIONS
Loading...