SIDE A
APP
USER GUIDE
Smart LED
String Lights
1
Download the
Feit Electric App
System Requirements
Minimum: iOS 9.3 or Android 4.4
- Dedicated 2.4GHz Wi-Fi Network -
TECHNICAL SUPPORT
1-866-326-BULB (2852)
www.feit.com/smartwifibulb
YOUR SCREEN IMAGES MAY DIFFER
FROM THIS USER GUIDE.
15 16
Make sure you are connected to
a 2.4GHz Wi-Fi Network, then tap
Lighting and then tap String Lights
.
2
Go to your Wi-Fi settings and connect
your phone to your 2.4GHz Wi-Fi network.
NOTE: Only works with 2.4GHz Wi-Fi networks
Wi-Fi 2.4GHz
Wi-Fi 5GHz
Wi-Fi 2.4GHz
Wi-Fi 5GHz
3
Launch the App and tap Register
for new accounts or Login
for existing accounts.
Tap upper right corner and make sure
you have EZ Mode selected.
Follow steps 11-13 to complete setup.
4
Enter E-Mail address,
then tap Continue.
(A verification code will be sent to
your email )
Create a Password then tap Done.
Features
Individual String Light On/Off
17
Tap the bulb icon to turn the light On/Off.
Permissions &
Location Access
5
6
You must Allow Feit Electric App to access
19
Tabs below dimmer bar allow you to quick select
Allow Notifications
(Highly Recommended).
your location to connect to your device.
Enter your location name.
Check where your device is located.
Tap Done.
Dimming
Slide the dimming bar up or down to
set the brightness level.
preset colors and the last color used.
Adding Device
NOTE: Only works with 2.4GHz Wi-Fi networks
7
Install and power On light(s)
then tap Add Device or the
plus (+) sign on upper right corner.
Color Changing
20
Tap on any part of the color wheel
to select a desired color. Preset colors
can be selected below the wheel.
Use the slide bar to adjust
21
the color saturation.
8 9
Using Bluetooth
Enable Bluetooth for simple
pairing on some Wi-Fi devices.
22
Dimming
Effects
Tap on Effects.
Eects
23
Select 6 different preset effects or create
your own by tapping on "Add Scene"
Make sure you are connected to a
2.4GHz Wi-Fi Network. The device name(s)
will pop up for Bluetooth-enabled devices.
Tap on Go to add.
String Lights 1
24 25
To modify Scenes, tap pen icon to adjust
Name, Color, Saturation, Brightness,
Mode and Speed.
•••
10
Make sure the lights are blinking,
then select one from the list.
Tap on + sign.
NOTE: If the bulbs are not blinking,
turn bulbs Off-On-Off-On-Off-On
String Lights
11
Select your 2.4GHz Wi-Fi network,
tap Confirm.
26
•••
27
Schedule
Tap on Schedule.
Eects
Tap Add Schedule.
12
The status window will appear
and show progress toward set-up
NOTE: If unsuccessful, the “Failed to Add”
screen will appear. Quit the app and repeat
30
the previous steps.
Timer
Select Timer.
Set the time then select OK
Dimming
13 14
To rename the device, tap the Pen icon,
enter the new name and tap
The string lights is now ready to be controlled
with the Feit Electric App.
NOTE: Constant power to the String Lights
is required at all times
Done.
31
A message will appear below
dimming bar.
Adding Multiple Devices
(EZ Mode)
Install and power On light(s)
then tap Add Device or the
plus (+) sign on upper right corner.
NOTE: Use this pairing method to connect
multiple devices at a time.
Additional Features
Renaming/Removing devices
Additional features are available
32
in the bulb settings context menu,
including renaming and removing devices.
Tap the context menu
in the upper right corner (•••).
Groups
33
Tap the Groups icon at the
bottom of the App.
NOTE: To create groups you will
need at least 2 string lights.
Individual String Light Setting
18
Press and hold the icon for 2 seconds
for light settings.
17
Select the Lights that you
34
Tap on Create Group.
36
want to group.
Backyard
String Lights 2String Lights 1
18
Dimming Eects
38
Once the group is named and the
String Lights are selected tap Save
NOTE: No other lighting devices will be able
to be grouped together. Only String Lights.
Backyard
.
Dimming Eects
Manage Groups
39
Tap the Groups icon.
40
Tap the context menu
in the upper right corner(•••).
35
Tap on String Lights.
37
Tap the group name and
enter the name of the group.
Backyard
String Lights 1
String Lights 2
41
Tap Manage Group.
20
Smooth fade in and out between colors
Flash transition between colors
21
Dimming
Eects
42
Select the group to edit.
Dimming
44
Rename the group or remove
a devices from the group.
Once complete, tap Save in the
Eects
upper right corner.
Smooth transition between colors.
45
46
Backyard
in the upper right corner (•••).
Solid:
Flash:
Fade:
Chase:
Intermittent in sequence.
(Up to 8 colors)
Delete Groups
Tap the Groups icon.
Tap the context menu
43
Once selected, tap Manage Group in the
upper right hand corner.
String Lights 1 String Lights 2
47
Tap Delete Group.
28
Choose a Start Time (On) and End Time (Off).
To repeat on certain days of the week, tap Repeat
otherwise the schedule will only occur once.
29
Tap on the day(s) of the week
you would like the schedule to repeat,
then tap back “ ” then Save.
29
28
48
Select the group to delete.
Once selected, tap Delete Group in
the upper right corner.
49
Tap CONFIRM.
Share Control of a Device
(Two Methods)
Method 1: Tap the Profile icon,
50
then tap Share Devices.
Method 2: Tap the context menu in the upper
right corner (•••) from the device setting menu
and tap on
Share Devices.
Recent Color
DimmingDimming
Eects
51
Tap Add at the bottom.
52
Select the device that you wish to share.
Tap Sharing
in the upper right corner.
Enter the account name of the person
53
you want to share with. This is typically
their email address. Then tap Done
when prompted.
NOTE: New members must set up an
account before sharing is possible.
USA + 1
SIDE B
Share Control of All Devices
Within a Location
54
Tap Profile
55
Enter the new member’s
email address then tap Add.
NOTE: New members must set up an
account before sharing is possible.
String Lights 2String Lights 1
Room Management
56
Tap the settings icon from the
home menu, then tap Add a Room.
“ ”
58
Tap on a preset room name or
create your own.
60
When finished, tap on Save.
Backyard
Home Management
62
main menu, then tap Home Management.
Tap Home from the
Smart Scenes
Open the Feit Electric App and tap
64
Smart Scenes located at
bottom of screen.
65
In the Scene Tab screen,
tap the + icon.
66
Tap on Launch Scenes.
67 68
Tap on Run the device.
Tap on a Device or Group
to execute an action.
69
On the Select Function screen, tap on
the action you want the device to perform.
Different feature devices may have
different actions available.
Tap Location Management
Tap Home, then tap Add members.
A
On the Switch screen,
tap On or Off, then save.
B
On the Color screen,
select Color (RGB), Saturation
and Brightness level, then save.
90%
57
C
On the White Light screen,
set Brightness level, then save.
59
Add a device by tapping
+
on the icon next to each device name.
70
Once you have configured
your action(s), tap Save.
61
Remove individual devices by tapping
on the icon next to each device name.
71
Your Scenario will appear
under Scene tab.
Tap Add Location to indicate where the
63.
smart devices are located.
Automation
72
Automations can be triggered by other
smart devices, sunrise/sunset etc.
From the Home Page tap Smart Scenes
Use smart scenes to setup and
name an action or group of actions
to occur at the same time.
Select on a condition you would
74
Select your device, then choose a function.
like to trigger.
Review your automations,
76
edit them if necessary,
then Save.
ENABLE SIRI
SHORTCUTS
(for use with iPhone)
1
To enable Siri to recognize the
scenario you’ve created, open the Feit
Electric App and tap Smart Scenes
located at the bottom of the screen.
2 3
In the Scene Tab,
tap add to siri located at the
bottom of the screen.
RGB & White
3
In the Siri Shortcut screen,
tap on the scenario you
would like to add to Siri.
4 5
Once on the Add to Siri screen,
tap on Add to Siri at the
bottom of the screen.
33
Now you can use the “Hey Siri”
command to control this action from
your iOS device. “Hey Siri” “Switch On
String Lights”
3
CONNECTING
TO ALEXA
It will also appear on the top of your
My Home screen.
Tap on Scenario to execute your action.
73
Tap Automation at the top of
the screen, and then tap +
1 2 3 4
Tap on Profile at bottom right.
Tap on Use Alexa and
Google Assistant.
Tap on Amazon Alexa.
If you do not have an account
with Amazon, please create one.
75
Select on a task you would
like to automate.
Select your device, then choose a function.
Tap on Link.Tap on Sign In With Amazon.
You will be linked automatically
to your Amazon Alexa app.
Your Automation will appear
under Automations tab.
CONNECTING
TO GOOGLE
ASSISTANT
1
Tap on Profile at bottom right.
Tap on Use Alexa and
Google Assistant.
NOTE: To set smart scenes see
Creating Smart Scenes
2 3 4
Tap on Google Assistant.
If you do not have an account
with Google, please create one.
Tap on Agree and Link.Tap on Re-Login.
You will be linked automatically
to your Google Assistant app.
Note: Additional devices will
be added automatically when
added to the Feit Electric App.
Note: Additional devices will
be added automatically when
added to the Feit Electric App.
feit.com/help
Loading...