Feiss VS13704 User Manual

Assembly Instructions For

VS13702, VS13703, VS13704

IMPORTANT

CIRCUIT BREAKER BOX

Upper Ring

Shade

Lower Ring

Glass Dome

TURN OFF THE POWER AT THE MAIN FUSE OR

BEFORE STARTING INSTALLATION

Carefully unpack and identify all parts before assembly. Bulbs

not included.

1. Follow enclosed supplement installation instructions for
electrical and fixture installation onto house outlet box. If
you do not have an outlet box at desired location to attach
the fixture than hire a qualified electrician to create one.

2. Install shade and bulb:

A. Place round glass plate over round metal plate.
B. Secure with counter ring. Do not over tighten.
C. Install bulb (not included). See relamping label located near

socket area for type and maximum allowed wattage.

NOTE: Make certain not to handle lamp with bare hand

since this will cause lamp to shatter at high heat. Handle with
clean soft cloth.

D. Place lower ring onto glass plate.
E. Place shade onto lower ring.
F. Place upper ring onto shade.
G. Install shade by placing over glass plate.

(E) 4/08

Mounting Plate

Fixture Plate

Bulb (not included)

Counter Ring

Glass Plate

Socket

Metal Plate

Cap Nuts