Feiss VS12701 User Manual

Assembly Instructions For

Bulb
(not included)

Counter Ring

Spacer Tube

Fixture Plate

Wrench
(supplied)

Shade

VS12701

TURN OFF THE POWER AT THE MAIN FUSE OR

Carefully unpack and identify all parts before assembly.

Bulbs not included.

1. Before proceeding below instructions followenclosed
“Multiple Standard InstallationInstructions” for
electrical and fixtureinstallation onto outlet box.

2. Remove counter ring and spacer tube from socket. Set
them aside.

3. Install glass shade onto fitter and lock into position by
installing the spacer tube and counter ring back onto
the socket. Use supplied wrench to tighten.

4. Install light bulb (not installed). See relamping label at
socket area for type and maximum allowed wattage.

(E) 10/07

IMPORTANT

CIRCUIT BREAKER BOX

BEFORE STARTING INSTALLATION

Cap Nut

Socket

Fitter