Feiss SF301 User Manual

Assembly Instructions For

SF301

x 1x 60

BA

1

EXTRA x 12 x 2 x 2 x 2 x 2 x 2 x 1x 2

(E) 12/11

IMPORTANT

TURN OFF THE POWER AT THE MAIN FUSE

OR CIRCUIT BREAKER BOX

BEFORE STARTING INSTALLATION

Carefully unpack and identify all parts

before assembly. Bulbs not included.

1. Follow enclosed supplement installation
instructions for electrical and fixture
installation onto house outlet box. If you
do not have an outlet box at desired
location to attach the fixture then hire a
qualified electrician to create one.

3A

3B

2. Install light bulb (not included). See
relamping label at socket area for type
and maximum allowed wattage.

3. A. Install the threaded pipe onto the
bottom of the socket assembly.

2

4

A

B

B. Install the font onto the threaded pipe

and fasten it using the finial.

4. Hang all crystal glass parts as shown on
drawing.

NOTE: To replace broken crystal or pin,

extras are included in hardware bag.
Replace by gently bending open pin,
remove broken crystal or pin, hook new
one, then close back pin. Avoid bending
pin into sharp angle.

4