Feiss SF256 User Manual

Assembly Instructions For

Fixture Plate

Socket Assembly

SF256

2

Bulb
(not included)

3

1

Long
Threaded Pipe

(E) 11/08

IMPORTANT

TURN OFF THE POWER AT THE MAIN FUSE OR

CIRCUIT BREAKER BOX

BEFORE STARTING INSTALLATION

Carefully unpack and identify all parts before assembly.

Bulbs not included.

1. Screw the long threaded pipe into coupler located at
bottom of socket assembly. Note correct position of
threaded pipe at illustration.

2. Follow enclosed supplement installation instructions
for electrical and fixture installation onto house outlet
box. If you do not have an outlet box at desired
location to attach the fixture than hire a qualified
electrician to create one.

3. Install bulb (not included). See relamping label located
at socket area for type and maximum allowed wattage.

Hex Nut

4B

4C

4A

Washer

Cap

Finial

Crown

Shade

4. A. Sit crown on top of glass shade. Then while holding
securely onto the glass shade, slide through the
installed threaded pipe until shade comes to a stop.

B. Secure into position by fastening with a flat washer

and hex nut. Do not over tighten.

C. Afterward, slip cover and install finial by screwing

onto protruding threaded pipe.