Feiss SF240 User Manual

Assembly Instructions For

Threaded Pipe

Fixture Plate

Socket
Assembly

Bulb
(not included)

SF240

TURN OFF THE POWER AT THE MAIN FUSE OR

Carefully unpack and identify all parts before assembly.

1. Screw short threaded end of threaded pipe into

2. Follow enclosed “Multiple Standard Installation

3. Install bulbs (not included). See relamping label located

4. Slide cap, open side facing down, and glass shade

5. Slip cap and fasten finial onto threaded pipe.

(E) 10/07

IMPORTANT

CIRCUIT BREAKER BOX

BEFORE STARTING INSTALLATION

Bulb not included.

coupler located at bottom of socket assembly. Note
correct position of threaded pipe at illustration.

Instructions” for electrical and fixture installation onto
ceiling outlet box.

at socket area for type and maximum allowed wattage.

through the threaded pipe. Secure in position by
fastening with a washer and a hex nut. Do not over
tighten.

Cap

Washer

Hex Nut

Cap

Finial

Glass Shade