Feiss SF229 User Manual
ASSEMBLY INSTRUCTIONS FOR SF229
TURN OFF POWER AT MAIN FUSE OR
CIRCUIT BREAKER BOX BEFORE
STARTING INSTALLATION
Carefully unpack and identify all parts
before assembly. Bulbs are not included.
(E) 10/06
IMPORTANT
Center Pipe
Socket
Bulb
(not included)
Threaded Pipe
Short Screws
Fixture Plate
1. Take fixture wire and ground wire exiting
above center column and thread through,
fixture plate, lock washer and hex nut.
Lock all together by tightening hex nut.
2. Install upper section of arms onto fixture
plate by fastening with short screws.
3. Screw threaded pipe into bottom of socket
assembly. Note correct position of
threaded pipe at illustration.
4. Follow enclosed “Multiple Standard
Installation Instructions” for electrical
and fixture installation onto ceiling
outlet box.
5. Install light bulb (not included). See
relamping label located at socket area for
type and maximum allowed wattage.
6. Place glass shade inside of cage. Then
slide the cage through the installed
threaded pipe until it stops. Secure by
fastening finial.
Glass Shade
Cage
Finial
Loading...