
Installation Instructions for
P1275
Lucia 2 Light Mini Pendant
Pendant
GP I :ENERAL RODUCT NFORMATION
This product is suitable for dry locations only.
This product may be dimmed with a standard incandescent dimmer.
This instruction shows a typical installation.
1A
5
P1275_
CAUTION - RISK OF FIRE
This product requires installation by a qualified electrician.
Before installing be sure to read all instructions and
TURNTHE POWERTOTHE ELECTRICAL BOX OFF.
3 3
CAP SCREW
1.0
STEM
1
Assemble the stems by screwing them together.
2
FIXTURE
1
LAMP
SHADE
DIFFUSER
4
CAP SCREW
Install the lamp by screwing it into the socket. Refer to the label on the lamp socket for Max Wattage information.
2
3
Install and secure the shade to the fixture with the provided cap screws.
Install and secure the diffuser to the bottom of the shade with the provided cap screws.
4
5
Follow enclosed supplement installation instructions for electrical and fixture installation onto house outlet box.
1

Ce produit nécessite une installation par un électricien
ATTENTION – RISQUE D’INCENDIE
qualifié.Avant d'installer assurez-vous de lire toutes les
instructions etTOURNER LE POUVOIR DE LA BOITE
ELECTRIQUE OFF
1A
ENDIGUER
3 3
5
2
1
AMPOULE
4
VIS DU CAPUCHON
FIXATION
OMBRE
DIFFUSEUR
VIS DU CAPUCHON
1
Assemblez les tiges en les vissant ensemble.
Installez la lampe en le vissant dans la douille. Reportez-vous à l'étiquette sur la douille de lampe Puissance max pour plus
2
d'informations.
3
Installer et fixer l'ombre à l'appareil avec les vis fournies.
Installez et fixez le diffuseur au fond de l'ombre avec les vis fournies.
4
5
Suivez les instructions d'installation jointes supplément pour l'installation électrique et de fixation sur la boîte de sortie de
la maison.
2

PRECAUCION – RIESGO DE INCENDIO
Este producto requiere la instalación por un electricista
calificado.Antes de instalar,asegúrese de leer todas las
instrucciones y APAGUE EL PODER DE LA CAJA
ELÉCTRICA NO.
1A
TALLO
3 3
5
2
1
BOMBILLA
4
TORNILLO DE CAPA
FIXTURE
SOMBRA
DIFFUSEUR
TORNILLO DE CAPA
1
Montar atornillando los tallos juntos.
2
Instale la lámpara enroscándolo en la toma de corriente. Consulte la etiqueta del casquillo de la lámpara para obtener
información Potencia Max.
Instale y asegure la sombra para el aparato con los tornillos proporcionados.
3
4
Instale y asegure el difusor en la parte inferior de la pantalla con los tornillos de la tapa.
Siga las instrucciones de instalación adjuntas suplemento para la instalación eléctrica y el accesorio en la caja de salida
5
casa.
3

SAVETHESE INSTRUCTIONS!
555 Theodore Fremd Ave Suite B101 Rye, NY 10580
800.969.3347
www.Feiss.com
© 2012 Feiss.All rights reserved.The "Feiss" graphic is a
registered trademark of Feiss. Feiss reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company
4