Assembly Instructions For
P1226
(E) 5/10
27"
33"
x 1
1
39"
45"
x 3
51"
57"
63"
69"
IMPORTANT
TURN OFF THE POWER AT THE MAIN FUSE OR
CIRCUIT BREAKER BOX
BEFORE STARTING INSTALLATION
Carefully unpack and identify all parts before assembly. Bulbs
not included.
1. Follow enclosed supplement installation instructions for
electrical and fixture installation onto house outlet box. If you
do not have an outlet box at desired location to attach the
fixture then hire a qualified electrician to create one.
2. Install shade onto socket by fastening with spacer tube and
counter ring. Note correct position of spacer tube from left
diagram. Use enclosed wrench to tighten the counter ring.
3. Install light bulb (not included). See relamping label at socket
area for type and maximum allowed wattage.
2
3
Loading...