Feiss P1074 User Manual

ASSEMBLY INSTRUCTIONS FOR P1074

Mounting Plate

Mounting Screws

Fixture Wire and Ground Wire

Canopy
Ball Cap Nut

Swivel

Small Threaded Pipe

Stem (S)
(4-12" Long
1-6" Long)

25"
Length

(E) 04/04

31"
Length

THE MAIN FUSE OR CIRCUIT BREAKER BOX

Fitter

Threaded Socket

Glass Shade

Spacer Tube

Counter Ring

Wrench

Bulb
(not included)

©MURRAY FEISS IMPORT CORP.

IMPORTANT TURN OFF THE POWER AT

BEFORE STARTING INSTALLATION

Carefully unpack and identify all parts before assembly.
Bulbs are not included.

STEM HUNG INSTALLATION:

A. Choose desired installation height from dimensions shown in above diagram.

Thread fixture wire through each stem to be used. Please note correct position of

stems from left diagram. Screw all stems together until secure.
B. Measure 6" of wire from end of canopy and cut off remaining wire. Split wires and

strip off 3/4" of insulation from each end.

1. Place Shade over threaded socket then spacer tube and secure with counter ring, using
 supplied wrench.

 2. Install light bulb (not included). See relamping label at socket area for type and maximum
 allowed wattage.

 3. Follow enclosed “Fixture Installation Instructions” for electrical and fixture installation
 onto ceiling outlet box. 

37"
Length

43"
Length

49"
Length

55"
Length

61"
Length

67"
Length

73"
Length

79"
Length

MURRAY FEISS