Assembly Instructions For
OLPL7000, OLPL7001
Cap Nut
Rubber Washer
2
Socket Base
Fixture
TURN OFF THE POWER AT THE MAIN FUSE OR
CIRCUIT BREAKER BOX
BEFORE STARTING INSTALLATION
Carefully unpack and identify all parts before assembly. Bulbs
not included.
1. Install bottom ring onto back plate by fastening as shown on
diagram.
2. Follow enclosed supplement installation instructions for
electrical and fixture installation onto house outlet box. If
you do not have an outlet box at desired location to attach
the fixture than hire a qualified electrician to create one.
3. Install compact fluorescent lamp by inserting into slots in
socket base, and then twist and lock. See illustration.
4. Slip shade through square bottom opening of fixture. Then
secure at top by fastening with rubber washer and cap nuts.
(E) 12/30/08
IMPORTANT
Compact Fluorescent
Lamp (included)
Shade
Socket Base
1
Compact
Bottom Ring
Fluorescent
Lamp
3
Fig. 1
4
Loading...