Feiss OL6001 User Manual

Assembly Instructions For

OL6001

Finial (small)

Rubber Washer

1

2

Font

Threaded Pipe

Coupler

Fixture Plate

Cap Nut

Carefully unpack and identify all parts before assembly.

1. A. Install a hex nut onto one end of threaded pipe leaving

B. Screw same end of threaded pipe into coupler. Tighten

C. Slide font through threaded pipe until checks onto

2. Follow enclosed supplement installation instructions for

3. Install bulb (not included). See relamping label located near

(E) 10/07

IMPORTANT

TURN OFF THE POWER AT THE MAIN FUSE OR

CIRCUIT BREAKER BOX

BEFORE STARTING INSTALLATION

Bulbs not included.

about 3/8" (10 mm) thread exposed.

hex nut.

roof. Lock them into position by fastening with rubber
washer and finial.

electrical and fixture installation onto house outlet box. If
you do not have an outlet box at desired location to
attach the fixture than hire a qualified electrician to create
one.

socket area for type and maximum allowed wattage.

3

4. Gently place glass shade inside of main frame.

Bulb (not included)

Main Frame

5. Install main frame onto roof by fastening with ball cap nuts
onto the two protruding threaded studs.

Shade

6. Install finial by screwing onto coupler.

4

5

Coupler

6

Finial