Feiss MR1077 User Manual

ASSEMBLY INSTRUCTIONS FOR MR1077

(E) 4/07

Screws

Glass Mirror

Bracket

Carefully unpack and identify

all parts before assembly.

1. Lay frame, with screw holes side facing up,
on a non-abrasive surface.

2. Gently lay glass mirror, with metal mirror
brackets side facing up, on top of frame.
Holes in mirror brackets must align with
holes in frame.

3. Secure glass mirror onto frame with 2
screws and lock washers at top and another
2 at bottom.

4. Measure distance between center points of
2 slots on top metal mirror bracket. Install
two picture frame hangers (not included)
into wall at corresponding position.

Note: Use a level to insure mounting

position is horizontal. Make certain the
picture hangers are securely fastened onto
wall to adequately support the weight of
the mirror. If not certain, consult a qualified
technician.

Frame

5. Carefully hang mirror onto wall.