Feiss MR1051 User Manual

ASSEMBLY INSTRUCTIONS FOR MR1049, MR1051

Carefully unpack and identify all parts

Frame

before beginning assembly.

(E) 09/03

Mirror

Screws

1.  Lay frame, with screw holes side facing up, on

a non-abrasive surface.

2.  Gently lay glass mirror, with metal mirror

brackets side facing up, on top of frame. holes
in mirror brackets must align with holes in
frame.

3.  Secure glass mirror onto frame with 2 screws

at top and another set at bottom.

4.  At desired wall location, install two picture

frame hangers or screws (not included) into
wall at corresponding position with two
notches at mounting bracket. Note: Use a
level to insure mounting position is horizontal.
Make certain the picture hangers or screws are
securely fastened onto wall to adequately
support the weight of the mirror. If not
certain, consult a qualified technician.



5. Carefully hang mirror onto wall.

Mounting Bracket

©MURRAY FEISS IMPORT CORP

MURRAY FEISS