Feiss MR1045 User Manual

ASSEMBLY INSTRUCTIONS FOR MR1045, MR1046

Carefully unpack and identify all

parts before beginning assembly.

(E) REV: 11/20/03

Glass Mirror

Slot for
picture
hanger

Metal
Mirror
Bracket

Frame

Measure

Distance

1.  Lay frame, with screw holes side facing

up, on a non-abrasive surface.

2.  Gently lay glass mirror, with metal

mirror brackets side facing up, on top of
frame. holes in mirror brackets must
align with holes in frame.

3.  Secure glass mirror onto frame with 2

screws and lock washer at top and
another set at bottom.

4.  Measure distance between center points

of 2 slots on top metal mirror bracket.
Install two picture frame hangers

 (not included) into wall at

corresponding position.


 Note: Use a level to insure mounting

position is horizontal. Make certain the
picture hangers are securely fastened
onto wall to adequately support the
weight of the mirror. If not certain,
consult a qualified technician.



5. Carefully hang mirror onto wall.

Screws and
Lock Washer

Mounting Slots

Suggested picture
hangers (Over 50 LB.
Capacity) (not included)

©MURRAY FEISS IMPORT CORP.

MURRAY FEISS