
Installation Instructions for
Fm375
Yorktown Heights 3 Light Indoor Flush Mount
Flush Mount
GP I :ENERAL RODUCT NFORMATION
This product is suitable for damp locations.
This product may be dimmed with a standard incandescent dimmer.
This instruction shows a typical installation.
1A
1
This product requires installation by a qualified electrician.
Before installing be sure to read all instructions and
TURNTHE POWERTOTHE ELECTRICAL BOX OFF.
CAUTION - RISK OF FIRE
FM375_
1.0
2
THREADED NIPPLE
3
SHADE
1
Follow enclosed supplement installation instructions for electrical and fixture installation onto house outlet box.
Install the lamp by screwing it into the socket. Refer to the label on the lamp socket for Max Wattage information.
2
3
3
4
2
WASHERS
HEX NUT
FONT
FINIAL
Slip the shade through the threaded nipple. Then secure the shade in place with the washers and hex nut (Don’t over
3
tighten).
4
Install font by fastening with finial
1

1A
Ce produit nécessite une installation par un électricien
ATTENTION – RISQUE D’INCENDIE
qualifié.Avant d'installer assurez-vous de lire toutes les
instructions etTOURNER LE POUVOIR DE LA BOITE
ELECTRIQUE OFF
1
2
FILETÉ ATTACHE
3
OMBRE
1
Suivez les instructions d'installation jointes supplément pour l'installation électrique et de fixation sur la boîte de sortie de
3
3
4
2
RONDELLES
ECROU HEXAGONAL
FONTE
FLEURON
la maison.
Installez la lampe en le vissant dans la douille. Reportez-vous à l'étiquette sur la douille de lampe Puissance max pour plus
2
d'informations.
3
Glissez l'ombre à travers le raccord fileté. Ensuite, fixez l'ombre en place avec les rondelles et écrou hexagonal (Ne pas trop
serrer).
4
Installer la police par fixation avec fleuron.
2

1A
PRECAUCION – RIESGO DE INCENDIO
Este producto requiere la instalación por un electricista
calificado.Antes de instalar,asegúrese de leer todas las
instrucciones y APAGUE EL PODER DE LA CAJA
ELÉCTRICA NO.
1
2
TUBITO ROSCADO
3
SOMBRA
1
Siga las instrucciones de instalación adjuntas suplemento para la instalación eléctrica y el accesorio en la caja de salida
3
3
4
2
ARANDELAS
TUERCA HEXÁGONO
TUERCA FUENTE
TUERCA DE REMATE
casa.
2
Instale la lámpara enroscándolo en la toma de corriente. Consulte la etiqueta del casquillo de la lámpara para obtener
información Potencia Max.
Deslice la sombra a través de la conexión roscada. A continuación, fije el tono en su lugar con las arandelas y la tuerca
3
hexagonal (No apriete demasiado).
Instale la fuente de fijación con florón.
4
3

SAVE THESE INSTRUCTIONS!
555 Theodore Fremd Ave Suite B101 Rye, NY 10580
800.969.3347
www.Feiss.com
© 2012 Feiss.All rights reserved.The "Feiss" graphic is a
registered trademark of Feiss. Feiss reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company
4