Assembly Instructions For
FM365, FM366
TURN OFF THE POWER AT THE MAIN FUSE OR
BEFORE STARTING INSTALLATION
Carefully unpack and identify all parts before assembly.
2
3
1
Bulbs not included.
1. Screw the long threaded pipe into coupler located at
bottom of socket assembly. Note correct position of
threaded pipe at illustration.
2. Follow enclosed supplement installation instructions
for electrical and fixture installation onto house outlet
box. If you do not have an outlet box at desired
location to attach the fixture then hire a qualified
electrician to create one.
3. Install bulbs (not included). See relamping label located
near socket area for type and maximum allowed
wattage.
(E) 5/11
IMPORTANT
CIRCUIT BREAKER BOX
4A
4. A. Slip shade through the threaded pipe until it securely
checks into bottom of crown. Then secure into
position by fastening with a flat washer and knurled
nut. IMPORTANT: DO NOT OVER TIGHTEN.
B. Install frame and notched cover by fastening with
finial.
4B
Loading...