
Installation Instructions for
F2787-3
Yorktown Heights 3 Light Chandelier
Chandelier
GP I :ENERAL RODUCT NFORMATION
This product is suitable for dry locations only.
This product may be dimmed with a standard incandescent dimmer.
This instruction shows a typical installation.
1A
1
1
This product requires installation by a qualified electrician.
Before installing be sure to read all instructions and
TURNTHE POWERTOTHE ELECTRICAL BOX OFF.
F2787-3_
CAUTION - RISK OF FIRE
1.0
1
4
3
2
FIXTURE
5
1
Follow enclosed supplement installation instructions for electrical and fixture installation onto house outlet box.
Install the candle tube by slipping through socket.
2
Install the candle follower onto the candle tube.
3
BOTTOM FINIAL
LAMP
CANDLE FOLLOWER
CANDLE TUBE
Install the lamp by screwing it into the socket. Refer to the label on the lamp socket for Max Wattage information.
4
5
Install bottom finial by screwing it onto the fixture.
1

Ce produit nécessite une installation par un électricien
ATTENTION – RISQUE D’INCENDIE
qualifié.Avant d'installer assurez-vous de lire toutes les
instructions etTOURNER LE POUVOIR DE LA BOITE
ELECTRIQUE OFF
1A
FIXATION
1
1
1
4
3
2
AMPOULE
SUIVEUR BOUGIE
TUBE BOUGIE
5
1
Suivez les instructions d'installation jointes supplément pour l'installation électrique et de fixation sur la boîte de sortie de
GARNITURE INFERIEUR
la maison.
2
Installer le tube de bougie en se glissant à travers le socket.
Installer le fouloir de bougie sur le tube de bougie.
3
Installez la lampe en le vissant dans la douille. Reportez-vous à l'étiquette sur la douille de lampe Puissance max pour plus
4
d'informations.
5
Installez fleuron fond en le vissant sur l'appareil.
2

PRECAUCION – RIESGO DE INCENDIO
Este producto requiere la instalación por un electricista
calificado.Antes de instalar,asegúrese de leer todas las
instrucciones y APAGUE EL PODER DE LA CAJA
ELÉCTRICA NO.
1A
FIXTURE
1
1
1
4
3
2
BOMBILLA
SEGUIDOR DE VELA
VELA DEL TUBO
5
1
Seguir las instrucciones de instalación adjuntas suplemento para la instalación eléctrica y sujeción en caja de salida de casa.
Instale el tubo vela por el deslizamiento a través de socket.
2
Instale el seguidor de vela en el tubo de vela.
3
Instale la lámpara enroscándolo en la toma de corriente. Consulte la etiqueta del casquillo de la lámpara para obtener
4
FINIAL FONDO
información Potencia Max.
Instalar el remate inferior atornillándolo en el aparato.
5
3

SAVE THESE INSTRUCTIONS!
555 Theodore Fremd Ave Suite B101 Rye, NY 10580
800.969.3347
www.Feiss.com
© 2012 Feiss.All rights reserved.The "Feiss" graphic is a
registered trademark of Feiss. Feiss reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company
4