Feiss F2758 User Manual
Assembly Instructions For
EXTRA
F2758/5
(RING)
EXTRA
A
222
1
2
1
3B
TURN OFF THE POWER AT THE MAIN FUSE
Carefully unpack and identify all parts
1. Install the fixture loop onto the top of the
2. Follow enclosed supplement installation
3. A. Install the candle tube onto the fitter.
B. Install light bulb (not included). See
4. Install the bottom center pipe onto the
(E) 5/2012
IMPORTANT
OR CIRCUIT BREAKER BOX
BEFORE STARTING INSTALLATION
before assembly. Bulbs not included.
fixture.
instructions for electrical and fixture
installation onto house outlet box. If you
do not have an outlet box at desired
location to attach the fixture then hire a
qualified electrician to create one.
relamping label at socket area for type
and maximum allowed wattage.
bottom coupler.
3A
5. Install the cap and leaf onto the bottom
4
center pipe and secure with the finial.
6. Hang all crystal glass parts as shown on
drawing.
NOTE: To replace broken crystal or pin,
extras are included in hardware bag.
Replace by gently bending open pin,
remove broken crystal or pin, hook new
one, then close back pin. Avoid bending
pin into sharp angle.
6
4
5
6
A
Loading...