Assembly Instructions For
REQUIRED
EXTRA 2
X 22 X 1
A B
4
F2756/3
EXTRA
PIN QTY
5
5
1
PIN
PART
TURN OFF THE POWER AT THE MAIN FUSE
Carefully unpack and identify all parts
2
3B
3A
1. Install the center pipe and top cap onto
2. Follow enclosed supplement installation
3. A. Install the candle tube onto the fitter.
B. Install light bulb (not included). See
4. Hang all crystal glass parts as shown on
NOTE: To replace broken crystal or pin,
(E) 5/2012
IMPORTANT
OR CIRCUIT BREAKER BOX
BEFORE STARTING INSTALLATION
before assembly. Bulbs not included.
the top of the socket assembly.
instructions for electrical and fixture
installation onto house outlet box. If you
do not have an outlet box at desired
location to attach the fixture then hire a
qualified electrician to create one
relamping label at socket area for type
and maximum allowed wattage.
drawing.
extras are included in hardware bag.
Replace by gently bending open pin,
remove broken crystal or pin, hook new
one, then close back pin. Avoid bending
pin into sharp angle.
4
B
A
Loading...