Feiss F2755 User Manual
Assembly Instructions For
REQUIRED
EXTRA 2
EXTRA
PIN QTY
4
4
X 15 X 15
2
A B
PIN
PART
F2755/3
TURN OFF THE POWER AT THE MAIN FUSE
Carefully unpack and identify all parts
before assembly. Bulbs not included.
1. Install the top assembly into the top
coupler.
2. Follow enclosed supplement installation
instructions for electrical and fixture
2
installation onto house outlet box. If you
do not have an outlet box at desired
location to attach the fixture then hire a
qualified electrician to create one.
3. A. Install the candle tube onto the fitter.
B. Install light bulb (not included). See
relamping label at socket area for type
and maximum allowed wattage.
4. Install the bottom center pipe onto the
bottom coupler.
5. Install bottom assembly onto the bottom
center pipe and secure with the finial.
(E) 5/2012
IMPORTANT
OR CIRCUIT BREAKER BOX
BEFORE STARTING INSTALLATION
3B
3A
6
A
6. Hang all crystal glass parts as shown on
drawing.
NOTE: To replace broken crystal or pin,
extras are included in hardware bag.
Replace by gently bending open pin,
remove broken crystal or pin, hook new
one, then close back pin. Avoid bending
pin into sharp angle.
1
4
6
B
5
Loading...