Feiss F2727-4 User Manual
Assembly Instructions For
Ø4
×2 ×2 ×5 ×1 ×1 ×1 ×1 ×1
EXTRA
×4
A
Ø8
×4
B
F2727/4
Ø16
Ø28
4
× 2 ×5 ×1 ×1 ×1 ×1 ×1
×1
C
EXTRA
× 2
(E) 12/11
Ø4
IMPORTANT
TURN OFF THE POWER AT THE MAIN FUSE
OR CIRCUIT BREAKER BOX
BEFORE STARTING INSTALLATION
Carefully unpack and identify all parts
before assembly. Bulbs not included.
Ø16
Ø8
Ø28
1. Install the top column onto the top of the
fixture.
2. A. Slip candle follower on top of candle
3
2C
5
2B
1
A
A
5
B
2A
5
B
5
tubes.
B. Install light bulb (not included). See
relamping label at socket area for type
and maximum allowed wattage.
C. Slide the shade onto the top column
and install the shade onto the fixture.
3. Install the fixture loop onto the top of the
fixture.
4. Follow enclosed supplement installation
instructions for electrical and fixture
installation onto house outlet box. If you
do not have an outlet box at desired
location to attach the fixture then hire a
qualified electrician to create one.
5. Hang all crystal glass parts as shown on
drawing.
NOTE: To replace broken crystal or pin,
extras are included in hardware bag.
Replace by gently bending open pin,
remove broken crystal or pin, hook new
one, then close back pin. Avoid bending
pin into sharp angle.
C
Loading...