Assembly Instructions For
x 6 x 36 x 36x 36
A B DC
1
F2708/6
EXTRA x 50 x 10 x 10 x 10 x 10 x 1x 10
TURN OFF THE POWER AT THE MAIN FUSE
Carefully unpack and identify all parts
1. Follow enclosed supplement installation
(E) 12/11
IMPORTANT
OR CIRCUIT BREAKER BOX
BEFORE STARTING INSTALLATION
before assembly. Bulbs not included.
instructions for electrical and fixture
installation onto house outlet box. If you
do not have an outlet box at desired
location to attach the fixture then hire a
qualified electrician to create one.
A
4
4
B
3B
3A
2
C
2. Install the center pipe and top cap onto
the top of the socket assembly.
3. A. Install the bobeche and the candle
tube cap onto the candle tube.
B. Install light bulb (not included). See
relamping label at socket area for type
and maximum allowed wattage.
4. Hang all crystal glass parts as shown on
drawing.
NOTE: To replace broken crystal or pin,
extras are included in hardware bag.
Replace by gently bending open pin,
remove broken crystal or pin, hook new
one, then close back pin. Avoid bending
pin into sharp angle.
4
D
4
Loading...