Feiss F2683-3 User Manual

Assembly Instructions For

F2683/3

(E) 5/11

3

IMPORTANT

TURN OFF THE POWER AT THE MAIN FUSE OR

CIRCUIT BREAKER BOX

BEFORE STARTING INSTALLATION

Carefully unpack and identify all parts before assembly.

Bulbs not included.

1. Screw the long threaded pipe into coupler located at
bottom of socket assembly. Note correct position of
threaded pipe at illustration.

2. Install the center column onto the threaded pipe.

3. Follow enclosed supplement installation instructions
for electrical and fixture installation onto house outlet
box. If you do not have an outlet box at desired
location to attach the fixture then hire a qualified

2

electrician to create one.

4. Install bulbs (not included). See relamping label located
near socket area for type and maximum allowed
wattage.

5. A. Slip shade through the threaded pipe until it securely
checks into bottom of crown. Then secure into
position by fastening with a flat washer and hex nut.
IMPORTANT: DO NOT OVER TIGHTEN.

B. Install cover by fastening with finial.

4

1

5A

5B