Feiss F2610-8 User Manual
Assembly Instructions For
45-3/4
2
F2610/8
"
51-7/8"
57-3/4"
63-7/8"
69-3/4"
(E) 12/10
75-7/8"
Extra
PIN Qty.
81-3/4"
PIN
PART
DESCRIPTION
2
S Hook
PIN
87-7/8"
Required
Extra
93-3/4"
X 9
1
IMPORTANT
TURN OFF THE POWER AT THE MAIN FUSE
OR CIRCUIT BREAKER BOX
BEFORE STARTING INSTALLATION
Carefully unpack and identify all parts before
assembly. Bulbs not included.
1
1. Slip center column down through the fixture wires,
and then screw into center of main frame.
2. Follow enclosed supplement installation instructions
3B
for electrical and fixture installation onto house
outlet box. If you do not have an outlet box at
desired location to attach the fixture then hire a
qualified electrician to create one.
3A
3. A. Install candle tube by slipping through sockets.
B. Install type-B, candelabra base, of 60 Watt
maximum bulbs (not included).
4. Hang all crystal glass parts as shown on diagram.
NOTE: To replace broken crystal or pin, extras are
included in hardware bag. Replace by gently bending
open pin, remove broken crystal or pin, hook new
one, then close back pin. Avoid bending pin into
sharp angle.
4
Loading...