Feiss F2606 User Manual
Assembly Instructions For
F2606/8
TURN OFF THE POWER AT THE MAIN FUSE OR
Carefully unpack and identify all parts before assembly. Bulbs
not included.
1. Slip center column down through the fixture wires, and then
screw on top of main frame.
2. A. Hook upper section of arm onto center column.
B. Hook bottom ends of arm onto main frame.
3
3. Follow enclosed supplement installation instructions for
electrical and fixture installation onto house outlet box. If you
do not have an outlet box at desired location to attach the
fixture then hire a qualified electrician to create one.
4. Install shade onto sockets by fastening with spacer tube and
counter ring. Note correct position of spacer tube from left
diagram. Use enclosed wrench to tighten the counter ring.
5. Install light bulbs (not included). See relamping label at socket
area for type and maximum allowed wattage.
(E) 5/10
IMPORTANT
CIRCUIT BREAKER BOX
BEFORE STARTING INSTALLATION
2A
2B
1
5
4
Loading...