Feiss F2479 User Manual
Assembly Instructions For
Extra PIN
Qty.
12
6
6
4
3
5
6
7
8
7
9
PIN PART
PIN
DESCRIPTION
S Hook
Bowtie pin
Head Pin
1
F2479/8+4
Required
Extra
Fixture Loop
Small Notched Cover
Short Threaded Pipe
Arm
1
X12 X4 X4
X1
2
32
6 bead
1 1 1
1
TURN OFF THE POWER AT THE MAIN FUSE OR
Carefully unpack and identify all parts before assembly. Bulbs
not included.
1. Turn arms so they are equally spaced apart from each other.
2. A. Install a hex nut onto one end of theshort threaded pipe
leaving about 3/8" (10mm) of thread exposed. Then install same
end of pipe by screwing onto top of fixture. Tighten hex nut.
B. Slip small notched cover and fixture loop through fixture
wires.
C. Install the small notched cover on top of fixture, making
certain arms are locked onto it’s notches, by fastening with
fixture loop.
D. Install a hex nut onto one end of short threaded pipe
leaving about 3/8" (10mm) of thread exposed. Then install same
end of pipe by screwing onto bottom of fixture. Tighten hex
nut.
E. Slip large notched cover through the installed threaded pipe
and secure by fastening with finial. Make certain arms are
locked onto it’s notches before tightening finial.
3. Follow enclosed supplement installation instructions for
electrical and fixture installation onto house outlet box. If you
do not have an outlet box at desired location to attach the
fixture then hire a qualified electrician to create one.
IMPORTANT: WHEN FOLLOWING SUPPLEMENT
INSTRUCTIONS STEP #6, MAKE CERTAIN TO SLIDE
CRYSTAL BOBECHE (IN BETWEEN COLLAR RING AND
CANOPY) DOWN THE CHAIN. See above illustration.
4. A. Install crystal bobeche by slipping through sockets.
B. Install candle tube by slipping through sockets.
C. Install type-B, candelabra base, of 60 Watt maximum bulbs
(not included).
(E) 12/09
7654
10 bead 12 bead
X8
X8
X32
8
2
IMPORTANT
CIRCUIT BREAKER BOX
BEFORE STARTING INSTALLATION
X8
X8 X8
1098
211
1211
X8 X1
2 1
11
10
12
5. Hang all crystal glass parts as shown on drawing.
NOTE: To replace broken crystal or pin, extras are included in
hardware bag. Replace by gently bending open pin, remove
broken crystal or pin, hook new one, then close back pin. Avoid
bending pin into sharp angle.
7
Large Notched Cover
Finial
Loading...