Feiss F2397-5 User Manual

Assembly Instructions For

F2397/5

4

1

Fixture Loop

Fixture Wires

2

Ball Cap Screw

Arm

Carefully unpack and identify all parts before assembly. Bulb not

included.

1. Carefully thread fixture wire through fixture loop. Screw fixture
loop onto top threaded pipe until secure.

2. A. Spread open all arms so they are equally spaced apart to each
other.

B. Lock upper section of arms with ball cap screw onto

corresponding holes at center body.

3. Install bottom cover onto bottom of fixture by fastening with
finial.

4. Follow enclosed supplement installation instructions for electrical
and fixture installation onto house outlet box. If you do not have
an outlet box at desired location to attach the fixture than hire a
qualified electrician to create one.

(E) 11/08

IMPORTANT

TURN OFF THE POWER AT THE MAIN FUSE OR

CIRCUIT BREAKER BOX

BEFORE STARTING INSTALLATION

Bottom
Cover

Finial

5. Place Shade over threaded socket then spacer tube and secure
with counter ring, using provided wrench.

6. Install bulbs (not included). See relamping label located at socket

Socket

Shade

5

Spacer Tube

Counter Ring

area for type and maximum allowed wattage.

3

6

Wrench
(supplied)

Bulb
(not included)