Feiss F2245-3 User Manual
Assembly Instructions For
2
Fixture Loop
F2245/3, F2246/3
TURN OFF THE POWER AT THE MAIN FUSE OR
BEFORE STARTING INSTALLATION
Carefully unpack and identify all parts before assembly.
Bulb not included.
1. Carefully thread fixture wire and ground wire through
fixture loop. Screw fixture loop onto top threaded
pipe until secure.
2. Follow enclosed supplement installation instructions
for electrical and fixture installation onto house outlet
box. If you do not have an outlet box at desired
location to attach the fixture than hire a qualified
electrician to create one.
3. A. Install brackets onto glass shade by fastening with a
flat washer and cap screw.
B. Install upper section of arms onto fixture by
1
fastening with cap nuts.
C. Install shade onto bottom end of arms by fastening
with cap screws.
(E) 10/07
IMPORTANT
CIRCUIT BREAKER BOX
Shade
Fixture
Socket
Flat Washer
4
3b
Cap Nut
Arm
3a
4. Install light bulbs (not included). See label located at
socket area for type and maximum allowed wattage.
Bulb (not included)
Cap Screw
3c
Cap Screw
Bracket
Loading...