Feiss F2229 User Manual
ASSEMBLY INSTRUCTIONS FOR F2229-8+4
1 2 3 65 74
Fixture Loop
(E) 11/11
Upper Leaf
Notched Cover
Arms
Bulb
(not included)
IMPORTANT
Candle Tube
2
Bobeche
TURN OFF THE POWER AT THE MAIN FUSE
OR CIRCUIT BREAKER BOX
BEFORE STARTING INSTALLATION
Carefully unpack and identify all parts
before assembly. Bulbs are not included.
1
3
Socket
Fitter
4
6
Cap Screw
1
6
1. Spread open all arms so they are evenly
spaced apart to each other.
2. Lock lower tier arms by fastening with
cap screw onto center body.
3. Slip notched cover and upper leaf through
threaded pipe, which is located at top of
fixture. Lock all together by fastening
with fixture loop. Note: make certain
arms are locked into notches of the
notched cover.
4. Follow enclosed supplement installation
instructions for electrical and fixture
1
installation onto house outlet box. If you
do not have an outlet box at desired
location to attach the fixture than hire a
qualified electrician to create one.
5
Lower Leaf
Assembly
5. Install lower leaf assembly by screwing
onto bottom of fixture.
6
Lower Tier Arm
7
6. Install bobeches by slipping through
socket until it securely sits onto fitter.
7. Slip candle tube over sockets.
8. Install bulbs (not included). See
relamping label located near socket area
for type and maximum allowed wattage.
9. Hang all crystal glass parts as shown on
drawing. NOTE: To replace broken
crystals extras are included in hardware
bag. Replace by gently bending open pin,
remove broken crystal, hook new one,
then close back pin. Avoid bending pin
into sharp angle.
Loading...