ASSEMBLY INSTRUCTIONS FOR F2187/6
(E) 4/07
Fixture Loop
Fixture Wire
Bulb
(not included)
Counter Ring
Shade
Socket
Fitter
TURN OFF THE POWER AT THE MAIN FUSE
OR CIRCUIT BREAKER BOX
BEFORE STARTING INSTALLATION
IMPORTANT
Carefully unpack and identify all parts
before assembly. Bulbs are not included.
1.
Carefully thread fixture wire through
fixture loop. Screw fixture loop onto
top threaded pipe until secure.
2. Open all arms so they are equally
spaced apart to each other.
3. Install one of two provided threaded
pipe into bottom coupler. Then slide
cap up through threaded pipe and lock
horizontal square tube attached at
back of arms onto its notches. Lock
cap into position by fastening finial.
4. Follow enclosed “Chain Suspended
Fixture Installation Instructions”
for electrical and fixture installation
onto ceiling outlet box.
5. Install shades onto fitters by fastening
counter rings onto threaded sockets.
Notched Cap
Threaded Pipe
Finial
6. Install bulbs (not included). See
relamping label located at socket
area for type and maximum allowed
wattage.
Arm
Coupler
Loading...