Page 1
ASSEMB LY I NST R U C T I ONS FOR F1923/3
Mounting screw
Mounting plate
Fixture plate
Ball Cap Nut
Swivel
Fixture wire
and Ground Wire
Fixture Coupler
Stem
(E) 10/04
27"
39"
51"
63"
Socket
Glass Shade
Counter Ring
Bulb (not included)
©M U R R AY FE I SS I MP OR T LL C .
75"
IMPORTANT TURN OFF THE POWER AT THE MAIN FUSE
OR CIRCUIT BREAKER BOX BEFORE STARTING INSTALLATION
Carefully unpack and identify all parts before assembly. Bulbs are not included.
1. Remove counter rings from sockets.
2. Install shades onto fitters by fastening back counter ring onto threaded sockets.
3. Install bulbs (Not included). See relamping label located at socket area for type and maximum
allowed wattage.
STEM HUNG INSTALLATION:
A. Choose desired installation height from dimensions shown in above diagram. Thread fixture wire
through each stem to be used. Please note correct position of stems from left diagram. Screw all
stems together until secure. Screw bottom stem into fixture coupler until secure.
B. Measure 6" of wire from end of canopy and cut off remaining wire. Split wires and strip off 3/4"
of insulation from each end.
C. Follow enclosed ”Fixture installation instructions” for electrical and fixture installation onto
ceiling outlet box.
MUR R AY FEI SS
Loading...