Feiss F1886-3 User Manual
ASSEMB LY I NST R U C T I ONS FOR F1886/3
(E) 04/04
27 1/2"
(70 cm)
Mounting Plate
Fixture wire
and Ground Wire
Swivel
Short Threaded Pipe
Stem (S)
5(-12" Long)
Fixture Coupler
39 1/2
(100 cm)
Machine Screw
Canopy
Ball Cap Nuts
51 1/2
(131 cm)
IMPORTANT TURN OFF THE POWER AT THE MAIN FUSE
OR CIRCUIT BREAKER BOX BEFORE STARTING INSTALLATION
Carefully unpack and identify all parts before assembly. Bulbs are not included.
1. Remove counter rings and check ring from sockets.
2. Install shades onto fitters by fastening back check ring (with smaller opening side facing down)
and counter ring onto threaded sockets.
63 1/2
(160 cm)
75 1/2
(192 cm)
87 1/2
(222 cm)
3. Install bulbs (Not included). See relamping label located at socket area for type and maximum
Fitter
Glass Shade
Check Ring
Counter Ring
Bulb (not included)
©M U R R AY FE I SS I MP OR T COR P.
allowed wattage.
STEM HUNG INSTALLATION:
A. Choose desired installation height from dimensions shown in above diagram. Thread fixture wire
through each stem to be used. Please note correct position of stems from left diagram. Screw all
stems together until secure. Screw bottom stem into fixture coupler until secure.
B. Measure 6" of wire from end of canopy and cut off remaining wire. Split wires and strip off 3/4"
of insulation from each end.
C. Follow enclosed ”Fixture installation instructions” for electrical and fixture installation onto
ceiling outlet box.
MUR R AY FEI SS
Loading...