Feiss F1884-10 User Manual

ASSEMB LY I NST R U C T I ONS FOR F1884/1

Fixture Loop

Fixture Wire
and Ground Wire

Top Threaded Pipe

Top Assembly

Arm

(E) 04/04

IMPORTANT

TURN OFF THE POWER AT THE MAIN

FUSE OR CIRCUIT BREAKER BOX

BEFORE STARTING INSTALLATION

 Carefully unpack and identify all parts

before beginning assembly. Bulbs are not
included.

1. Carefully thread fixture wire and ground wire 

through fixture loop. Screw fixture loop onto
top threaded pipe until secure.

2. Install bulb (Not Included) into socket. See

relamping label located at socket area for type
and maximum allowed wattage.

Socket

Cap Nut Screws

Arm
Brackets

Threaded Stud

Bulb
(not included)

Rubber Washer

Knurled Cap Nut

3. Slip threaded studs of arm brackets through

holes in outside of glass. Secure with rubber
washer and knurled cap nuts.

4. Align holes in arm brackets with holes in

bottom of arms. Secure with cap nut screws.

5. Follow enclosed “Chain Suspended
Installation Instructions” for electrical and

fixture installation onto ceiling outlet box.

Glass Shade

©M UR RA Y F EI SS I MP OR T CO R P.

MU R R AY FEI SS