MSh 636-1
Die Grinder
SERVICE
Tool service and maintenance must be performed only by qualified
repair personnel.
When servicing a tool, only use identical replacement parts available
from FEIN.
Repairs on FEIN Power T ools required the use of special tools (pulling devices
and bearing press). Authorized repair centers have trained repair technicians
and equipment necessary to per-form these repairs. Service or repairs performed
by unqualified persons could result in operator injury.
For the location of the repair center near you, please call 1-800-441-9878.
Monday thru Friday, 9AM to 5PM EST. Or, look on our web site at
www .feinus.com and follow the link to “Authorized W arranty Repair Centers”
FEIN Power Tools
1030 Alcon Street
Pittsburgh, PA 15220
Phone: 412-922-8886
April 12, 2004
Fax: 412-922-8767
T oll Free: 1-800-441-9878
FEIN Power Tools
r
n
MSh 636-1 Parts List
Item Item Numbe
10 3-19-01-017-00-7 MOTORHOUSING 1
20 3-28-16-025-00-3 SWITCH BAR 1
30,40 3-28-05-118-01-3 SWITCH SLIDE 1
60 5-1-203-004-11-5 FIELD COIL 1
80 4-30-02-025-99-1 SCREW 2
90 3-14-28-007-00-1 AIR CONDUCTING RING 1
100 3-07-12-055-01-1 BRUSH HOLDER (RIGHT) 1
101 3-07-12-056-01-4 BRUSH HOLDER (LEFT) 1
110 3-07-11-062-00-1 CARBON BRUSH 2
130 4-30-41-007-99-0 SCREW 2
140 3-07-01-060-00-0 SWITCH 1
150 3-07-22-037-00-4 CAPACITOR 1
160 4-30-03-013-99-1 CYLINDRICAL SCREW 1
175 3-07-07-101-01-2 CABLE 1
180 3-14-13-142-00-9 CABLE PROTECTING SLEEVE 1
190 3-24-31-021-00-7 CABLE CLAMP 1
200 4-30-41-001-99-4 SCREW 2
210,211 3-24-27-028-00-6 COVER 1
211 3-14-15-042-00-8 SWITCH PADDING 1
220 4-30-66-002-99-2 SCREW 1
230 4-30-03-025-99-2 SCREW 1
260-310 5-3-203-003-11-9 ARMATURE 1
300 3-34-12-026-00-2 CLUTCH SHAFT 1
310 4-30-64-001-99-3 SCREW 3
330 4-17-01-001-17-2 BALL BEARING 2
350 3-15-10-042-00-5 NECK HOUSING 1
370 3-34-03-047-00-6 DRIVE SHAFT 1
380 3-24-08-020-00-8 DISC 1
390 3-06-01-047-00-8 FELT RING 1
400 3-24-11-051-00-7 COVER PLATE 1
410 4-17-01-020-13-0 BALL BEARING 1
420 3-09-05-026-00-6 SPRING 2
430 4-26-16-013-00-1 SNAP RING 1
440 3-05-14-078-00-5 SLEEVE 1
450 4-17-01-204-09-5 BALL BEARING 1
460 4-02-21-001-00-9 FITTING KEY 1
470 3-01-02-045-00-0 CLUTCH 1
480 6-32-07-059-00-6 COLLET 6MM 1
6-32-07-088-00-9 COLLET 1/4" 1
510 3-15-06-193-00-1 INTERMEDIATE 1
530 4-02-21-001-00-9 FITTING KEY 1
540 3-01-02-045-00-0 CLUTCH 1
550 3-01-02-046-00-3 INTERMEDIATE CLUTCH 1
560 4-30-02-021-99-2 SCREW 4
570 4-24-43-002-99-2 LOCK WASHER 4
Descriptio
Reqd
Loading...