Page 1
MOl 1200E
8”Random Orbit Sander
SERVICE
Tool service and maintenance must be performed only by qualified
repair personnel.
When servicing a tool, only use identical replacement parts available
from FEIN.
Repairs on FEIN Power T ools required the use of special tools (pulling devices
and bearing press). Authorized repair centers have trained repair technicians
and equipment necessary to per-form these repairs. Service or repairs performed
by unqualified persons could result in operator injury.
For the location of the repair center near you, please call 1-800-441-9878.
Monday thru Friday, 9AM to 5PM EST. Or, look on our web site at
www .feinus.com and follow the link to “Authorized W arranty Repair Centers”
FEIN Power Tools
1030 Alcon Street
Pittsburgh, PA 15220
Phone: 412-922-8886
November 24, 2003
Fax: 412-922-8767
T oll Free: 1-800-441-9878
Page 2
Page 3
Fein Power Tools
MOL 1200E Parts List
Item
Item Number
Description
Reqd
10 3-24-31-021-00-7 Cable Clamping Piece 1
20 4-30-70-001-00-6 Screw 2
30 3-24-31-040-00-6 Strain Relief 1
40 3-07-62-233-99-9 Speed Control (120V) 1
50 4-17-01-001-17-2 Ball Bearing 1
60 3-07-12-088-01-3 Brush Holder 2
70 3-07-11-132-00-3 Carbon Brush 2
80 4-30-70-018-00-9 Screw 2
90 3-19-01-114-01-4 Motor Housing 1
100 5-3-273-001-11-7 Armature (110V) 1
110 3-14-28-118-00-7 Air Conducting Ring 1
120 3-24-16-098-00-5 Cover Plate 1
140 4-30-70-007-00-2 Screw 4
200,210 3-12-06-110-01-5 Gear Housing 1
210 4-17-05-019-00-1 Needle Bearing 1
220 3-09-01-032-00-3 Pressure Ring 1
230 3-02-17-327-00-3 Retention Pin 1
240 4-06-12-137-00-8 Sealing Ring 1
250 3-28-05-164-00-0 Retention Button 1
260 3-24-19-115-00-6 Bearing Plate 1
270 3-34-06-284-00-9 Drive Shaft 1
280 4-17-01-010-05-4 Ball Bearing 1
290 3-24-16-101-00-9 Cover Plate 1
305 3-38-09-229-01-2 Bevel Gear (11/44T) 1
320 3-26-24-117-00-9 Washer
330 4-24-43-003-04-3 Securing Ring 4
340 4-30-41-023-04-6 Screw 4
350 3-18-10-202-99-9 Rubber Suction Hood & Band 1
355 3-18-10-205-77-7 Hose Clamp 1
360 3-18-10-205-99-9 Suction Housing 1
370 3-12-07-105-99-9 Eccentric Shaft 1
370a 4-17-01-218-88-8 Bearing 1
370b 4-17-01-218-99-9 Bearing 1
380 4-30-02-030-99-9 Screw 4
390 4-24-01-012-04-9 Disc 1
400 6-38-06-092-99-9 Sanding Pad (8in) 1
450 4-17-01-007-03-8 Ball Bearing 1
480 3-28-05-156-00-8 Sliding Switch 1
490 5-1-273-001-11-5 Field (110V) 1
500 4-30-70-017-00-1 Screw 2
510 3-28-16-055-00-0 Switch Bar 1
520 3-28-16-052-00-4 Switch Rod 1
530 4-30-03-013-99-1 Screw 2
540 3-07-01-218-00-3 ON/OFF Switch 1
550 3-12-01-101-00-8 Cover 1
560 3-14-15-082-00-4 Bolster 1
570 3-14-13-007-00-7 Protective Sleeve 1
580 3-07-05-051-99-9 Cable 1
600 3-14-28-125-00-1 Hood 1
610 4-30-64-020-04-9 Screw 2
590 3-21-19-107-01-6 Side Handle
6-29-13-005-00-4 Pin for Removing Pad
6-29-10-022-00-2 Two Slot Nut Driver
Loading...