FSs 12-27E
Rotary Sander
SERVICE
Tool service and maintenance must be performed only by qualified
repair personnel.
When servicing a tool, only use identical replacement parts available
from FEIN.
Repairs on FEIN Power T ools required the use of special tools (pulling devices
and bearing press). Authorized repair centers have trained repair technicians
and equipment necessary to per-form these repairs. Service or repairs performed
by unqualified persons could result in operator injury.
For the location of the repair center near you, please call 1-800-441-9878.
Monday thru Friday, 9AM to 5PM EST. Or, look on our web site at
www .feinus.com and follow the link to “Authorized W arranty Repair Centers”
FEIN Power Tools
1030 Alcon Street
Pittsburgh, PA 15220
Phone: 412-922-8886
November 24, 2003
Fax: 412-922-8767
T oll Free: 1-800-441-9878
Fein Power Tools
FSs 12-27E Parts List
Item
10 3-24-31-021-00-7 CABLE CLAMPING PIECE 1
20 4-30-70-001-00-6 SCREW 2
30 3-24-31-040-00-6 STRAIN RELIEF 1
40 3-07-62-233-99-9 SPEED CONTROL (120V) 1
50 4-17-01-001-17-2 BALL BEARING 1
60 3-07-12-088-01-3 BRUSH HOLDER 2
70 3-07-11-132-00-3 CARBON BRUSH 2
80 4-30-70-018-00-9 SCREW 2
90 3-19-01-114-01-4 MOTOR HOUSING 1
100 5-3-273-001-11-7 ARMATURE (110V) 1
110 3-14-28-118-00-7 AIR CONDUCTING RING 1
120 3-24-16-098-00-5 COVER PLATE 1
140 4-30-70-007-00-2 SCREW 4
200,210 3-12-06-110-01-5 GEAR HOUSING 1
210 4-17-05-019-00-1 NEEDLE BEARING 1
220 3-09-01-032-00-3 PRESSURE RING 1
230 3-02-17-327-00-3 RETENTION PIN 1
240 4-06-12-137-00-8 SEALING RING 1
250 3-28-05-185-00-2 RETENTION BUTTON 1
260 3-24-19-115-00-6 BEARING PLATE 1
270 3-34-06-284-00-9 DRIVE SHAFT 1
280 4-17-01-010-05-4 BALL BEARING 1
290 3-24-16-101-00-9 COVER PLATE 1
305 3-38-09-229-01-2 BEVEL GEAR (11/44T) 1
320 3-26-24-117-00-9 WASHER
330 3-15-08-241-00-3 OUTER BEARING 1
340 4-17-01-110-22-8 BEARING 1
350 3-38-04-023-00-2 GEAR 1
360 4-17-01-109-05-3 BALL BEARING 1
370 4-24-43-003-04-3 SECURING DISC 4
380 4-30-41-027-04-5 SCREW 4
450 4-17-01-007-03-8 BALL BEARING 1
480 3-28-05-156-00-8 SLIDING SWITCH 1
490 5-1-273-001-11-5 FIELD (110V) 1
500 4-30-70-017-00-1 SCREW 2
510 3-28-16-055-00-0 SWITCH BAR 1
520 3-28-16-052-00-4 SWITCH ROD 1
530 4-30-03-013-99-1 SCREW 2
540 3-07-01-218-00-3 ON/OFF SWITCH 1
550 3-12-01-101-00-8 COVER 1
560 3-14-15-082-00-4 BOLSTER 1
570 3-14-13-007-00-7 PROTECTING SLEEVE 1
580 3-07-05-051-99-9 CABLE 1
600 3-14-28-125-00-1 HOOD 1
610 4-30-64-020-04-9 SCREW 2
700 3-18-10-240-01-4 DUST HOOD 1
710 4-30-64-002-04-3 SCREW 4
720 3-02-34-018-00-1 HOOD STRAP 1
Idem Number Description Reqd
590 3-21-19-107-01-6 SIDE HANDLE 1
6-29-13-005-00-4 PIN TYPE SPANNER WRENCH
6-29-10-022-00-2 TWO SLOT NUT DRIVER
6-38-06-116-02-1 SANDING PAD - 6"
6-38-06-118-02-3 SANDING PAD - 8"
Loading...