Page 1
FSC 1.6
Special Cutter
SERVICE
T ool service and maintencance must be performed only by qualified
repair personnel.
When servicing a tool, only use identical replacement parts available
from FEIN.
Repairs on FEIN Power T ools required the use of special tools (pulling devices
and bearing press). Authorized repair centers have trained repair technicians
and equipment necessary to per-form these repairs. Service or repairs performed
by unqualified persons could result in operator injury.
For the location of the repair center near you, please call 1-800-441-9878.
Monday thru Friday, 9AM to 5PM EST. Or, look on our web site at
www .feinus.com and follow the link to “Authorized W arranty Repair Centers”
FEIN Power Tools
1030 Alcon Street
Pittsburgh, PA 15220
Phone: 412-922-8886
March 1, 2005
Fax: 412-922-8767
T oll Free: 1-800-441-9878
Page 2
Page 3
Fein Power Tools
r
n
FSC 1.6 Parts List
Item Item Numbe
10 3-19-01-139-01-5 MOTOR HOUSING - FSC 1
20 3-28-05-195-00-1 SWITCH SLIDE - FSC 1
30 3-28-16-060-00-1 SWITCH ROD - FSC 1
40 5-1-274-006-11-4 FIELD COIL - FSC - 110V 1
50 4-30-70-014-00-0 SCREW 2
60 3-14-28-151-00-9 AIR CONDUCTING RING - FSC 1
80 3-28-05-194-01-6 SPEED BUTTON SET - FSC 1
90 3-24-27-120-01-1 COVER REPAIR SET - FSC 1
100 3-07-62-266-99-1 ELECTRONIC - FSC - 110V 1
110 3-07-19-619-01-3 CONNECTION CABLE - FSC 1
120 3-24-31-044-00-0 CABLE CLAMP - FSC 1
130 3-24-31-043-00-2 CLAMP BRIDGE - FSC 1
140 4-30-70-038-00-7 SCREW - FSC 5
150 3-14-13-225-00-3 PROTECTIVE SLEEVE - FSC 1
165 3-07-07-101-01-2 CABLE-16GA 10FT W/MOLDED PLUG 1
175 3-07-12-091-02-4 BRUSH HOLDER SET - FSC 1
180 3-07-11-146-00-1 CARBON BRUSH - FSC 2
200 4-30-41-040-04-8 SCREW 1
210 3-14-15-095-00-9 PLUG 2
255 5-3-274-010-11-4 ARMATURE - FSC 1.6 - 110V 1
260 4-17-01-001-03-2 BEARING 1
270 3-14-28-152-00-2 MAGNET - FSC 1
280 4-17-01-007-03-8 BALL BEARING 1
290 3-26-03-036-00-5 BALANCING RING - FSC 1
405 3-15-08-253-01-8 GEAR HOUSING - FSC 1
410 3-15-06-369-01-6 INTERMEDIATE HOUSING 1
420 3-32-18-119-00-2 LEVER - FSC 1
430 3-34-06-296-00-5 DRIVE SHAFT - FSC 1
440 3-05-07-234-01-0 BUSHING - FSC 1
500 4-17-06-041-00-5 NEEDLE BEARING - FSC 1
510 3-09-01-359-00-7 SPRING - FSC 2
530 4-17-01-010-05-4 BALL BEARING 1
550 4-06-12-024-00-9 SEALING RING - FSC 1
560 4-06-12-093-00-4 O-RING 1
570 3-06-10-035-00-2 SEAL - FSC 1
580 4-06-08-072-00-5 SEALING RING - FSC 1
600 4-26-16-027-00-9 SECURING RING 1
610 4-24-46-016-00-3 WASHER - FSC 1
620 4-30-74-001-00-0 SCREW - FSC 4
630 3-30-01-039-01-7 NUT ASSY - FSC 1.6 1
Descriptio
Reqd.
Loading...