Page 1
AStlxe 638
Special Cutter
SERVICE
Tool service and maintenance must be performed only by qualified
repair personnel.
When servicing a tool, only use identical replacement parts available
from FEIN.
Repairs on FEIN Power T ools required the use of special tools (pulling devices
and bearing press). Authorized repair centers have trained repair technicians
and equipment necessary to per-form these repairs. Service or repairs performed
by unqualified persons could result in operator injury.
For the location of the repair center near you, please call 1-800-441-9878.
Monday thru Friday, 9AM to 5PM EST. Or, look on our web site at
www .feinus.com and follow the link to “Authorized W arranty Repair Centers”
FEIN Power Tools
1030 Alcon Street
Pittsburgh, PA 15220
Phone: 412-922-8886
November 24, 2003
Fax: 412-922-8767
T oll Free: 1-800-441-9878
Page 2
Page 3
Fein Power Tools
t
r
Astlxe 638 Special Cutter - Parts Lis
Item Item Numbe
10 3-19-01-093-00-0 MOTOR HOUSING 1
20 3-28-05-128-00-3 TRIGGER 1
30 3-28-16-049-00-0 SWITCH LEVER 1
40 5-1-268-001-11-2 FIELD COIL 1
50 4-30-70-004-00-1 SCREW 1
70 3-14-28-075-00-7 AIR CONDUCTING RING 2
80 3-07-19-448-01-7 CONNECTION CABLE 2
100 3-07-62-242-02-9 SPEED CONTROL 1
110 3-09-02-040-00-4 SPRING 1
120 3-07-12-095-01-7 BRUSH HOLDER 2
130 3-07-11-140-00-0 CARBON BRUSH 2
140 3-24-31-036-00-8 CABLE BRIDGE 1
150 3-07-07-101-01-2 CABLE 1
160 3-14-13-007-00-7 STRAIN RELEASE 1
170 3-12-01-072-01-4 COVER 1
171 3-14-15-065-00-2 CUSHION 1
180 4-30-70-001-00-6 SCREW 2
210 3-07-19-340-02-4 CONNECTION CABLE 2
250-270 5-3-268-001-11-4 ARMATURE 1
260 3-34-05-031-00-9 PINION 1
270 4-30-64-001-99-3 SCREW 3
300 3-15-06-309-00-3 INTERMEDIATE PLATE 1
320 3-15-08-227-00-1 GEARHOUSING 1
330 3-32-18-057-00-7 LEVER 1
340 4-17-06-033-00-3 NEEDLE BEARING 1
350 3-23-13-045-01-2 PISTON 1
360 4-02-38-017-00-4 CLAMPING SLEEVE 1
370 3-05-07-180-00-8 BUSHING 1
380 4-17-05-022-00-5 NEEDLE BEARING 1
390 3-34-06-247-00-4 OUTPUT SHAFT 1
400 4-06-12-129-00-1 O RING 1
410 4-17-01-007-03-8 BALL BEARING 1
420 4-06-08-054-00-9 SEAL 1
430 3-05-09-041-00-0 THREADED SLEEVE 1
500 4-17-01-004-24-6 BALL BEARING 1
510 4-17-01-001-17-2 BALL BEARING 1
520 3-26-03-035-00-2 BALANCING RING 1
530 3-14-28-076-01-9 MAGNET RING 1
540 4-06-12-089-00-6 O RING 1
550 4-06-08-059-00-2 SEAL 1
560 4-06-12-088-00-2 O RING 1
610 3-30-24-062-00-4 CLAMPING BOLT 1
620 4-30-70-007-00-2 SCREW 4
630 4-30-70-004-00-1 SCREW 2
Description Reqd
Loading...