ASb 658-1
Impact Wr ench
SERVICE
T ool service and maintenance must be performed only by qualified
repair personnel.
When servicing a tool, only use identical replacement parts available
from FEIN.
Repairs on FEIN Power T ools required the use of special tools (pulling devices
and bearing press). Authorized repair centers have trained repair technicians
and equipment necessary to per-form these repairs. Service or repairs performed
by unqualified persons could result in operator injury.
For the location of the repair center near you, please call 1-800-441-9878.
Monday thru Friday, 9AM to 5PM EST. Or, look on our web site at
www .feinus.com and follow the link to “Authorized W arranty Repair Centers”
FEIN Power Tools
1030 Alcon Street
Pittsburgh, PA 15220
Phone: 412-922-8886
April 15, 2004
Fax: 412-922-8767
T oll Free: 1-800-441-9878
Fein Power Tools
Asb 658-1 Parts List
Item Item Number Description Reqd.
10 3-19-03-101-01-5 MOTOR HOUSING 1
20 3-19-13-011-01-4 INSULATED. HOUSING ASSEMBLY 1
30 3-07-12-050-00-4 BRUSH HOLDER 2
31 4-26-15-135-00-5 RETAINER RING 2
40 4-30-02-105-05-5 SCREW 2
50 4-24-43-004-05-7 LOCKING WASHER 2
60 5-1-226-002-11-8 FIELD COIL 1
70 4-30-01-004-04-2 SCREW 2
90 3-07-19-051-01-5 CONNECTION CABLE 2
100 3-07-11-070-00-8 CARBON BRUSH 2
110 3-24-27-037-01-6 COVER 2
130 4-30-02-034-04-3 SCREW 4
140 3-14-28-052-00-3 AIR CONDUCTING RING 1
150 5-3-226-002-11-0 ARMATURE 1
210 3-15-06-166-01-8 INTER HOUSING 1
280 3-07-05-035-01-3 CABLE 1
320 3-07-01-068-00-3 REVERSING SWITCH 1
330 3-07-22-122-02-6 CAPACITOR 1
331 3-07-19-164-01-8 CABLE CLAMP 1
332 3-14-13-188-00-6 SLEEVE 1
340 3-24-31-021-00-7 CABLE CLAMP 1
350 4-30-41-011-99-3 SCREW 2
360 3-14-13-090-00-3 CABLE PROTECTING SLEEVE 1
420 3-07-01-210-01-9 REVERSING SWITCH 1
421 3-24-14-106-00-5 SWITCH INSERT 1
460 3-01-10-011-00-0 DRIVE SHAFT 1
470 3-36-13-066-00-7 BALANCE SPRING 2
480 4-17-15-014-00-7 NEEDLE CAGE 2
490 3-02-16-054-00-7 BOLT 2
500 4-17-01-604-01-1 BALL BEARING 608-RS1 1
510 4-17-08-014-00-1 BALL 29
520 3-26-02-040-00-2 RETAINER RING 1
530 3-09-01-213-00-4 PRESSURE SPRING 1
540 4-17-08-020-00-6 BALL 2
550 3-01-12-013-00-0 PERCUSSION PISTON 1
560 3-01-04-045-00-8 TOOL HOLDER 1
570 3-15-08-114-01-4 GEAR HOUSING 1
580 3-21-31-037-00-5 LUBRICATING NIPPLE 1
600 4-17-01-204-09-5 BALL BEARING 608-RS1 1
610 4-17-01-213-02-7 BALL BEARING 608-RS1 1
620 4-26-40-011-00-2 GASKET 1
630 4-26-43-001-00-7 SEEGER CIRCLIP RING 1
640 4-30-33-018-05-7 SCREW 4
650 4-24-43-004-05-7 LOCK WASHER 4
660 3-14-06-028-00-7 INSULATING BUSH 2
670 4-30-33-014-05-8 SCREW 8
680 3-26-24-039-02-5 WASHER .01MM
680 3-26-24-039-03-1 WASHER .03MM
2000 3-12-04-161-00-4 HANDLE LOWER PART 1
2010 3-12-04-163-00-1 HANDLE UPPER PART 1
2020 4-30-03-042-04-1 SCREW 2
2080 3-12-04-162-00-7 HANDLE LOWER PART 1
2110 3-14-16-039-00-9 SCREW PLUG 1
2120 3-12-04-163-00-1 HANDLE UPPER PART 1
2130 4-30-03-042-04-1 SCREW 2
Loading...