Fego Precision Co TP36RF315 1 Users manual

Transmitter: TP36RF315

SPEC

Power: AAA battery*2
Distance: 40 feet(air)
Frequency: RF 315MHz fixed frequency
ID: 65535 sets
Dim: DIP SW ON ==> Light Dimmer, DIP SW OFF ==> Light ON / OFF

FAN Function

OFF KEY: fan off
HI KEY: fan high speed
MED KEY: fan medium speed
LO KEY: fan low speed

LIGHT Function

LIGHT KEY: Light on/off or dimmer

Receiver: RL-142

SPEC

Power: 120V/60 HZ
Frequency: RF 315 MHZ
FAN: Hi-Med-Lo 3 speeds
LIGHT: Light On/Off or dim is controlled by Transmitter DIP SW

FAN Function

Hi: Fan runs in high speed and the receiver long beeps for 3 times.
Med: Fan runs in medium speed and the receiver long beeps for 2 times.
Low: Fan runs in low speed and the receiver long beeps for 1 times.
Off: Fan stops running and the receiver beeps for 4 times.

LIGHT Function

Non-dim mode:

Light runs only full on and off.
The receiver short beeps for one time.
This mode is only used for CFL bulb.

Dim mode:

Light can be dimmed.
It dims from lightest to lowest back and forth.
When the light is the brightest or lowest, it short beeps for 2 times.
This mode is not suitable for CFL bulb.

FAN & LIGHT Memory Function

The receiver would memorize the fan speed and bulb brightness.
If in Dim mode, the brightness of the bulb would be memorized in the receiver.
When the AC power is turned off for more than 2 seconds and back to work, the
fan speed and bulb will recover.

Automatic Pairing

The receiver and transmitter pair each other automatically.
By learning process, the receiver memorize the transmitter code in build-in
memory automatically.

Learning process:
In one minute when the receiver first time gets powered, press and hold the Off
button on the transmitter for about 5 seconds.
The receiver beeps for 4 times to complete the learning process.
The pairing is done and you can start to use it