FEELTONE Singing Chair, Soundchair User Manual
by feeltone products
1
KLST-1 and KLST-2
for therapy and wellness
The Singing Chair
KLST-1 has 20 strings tuned in c and 20 in C. It is made out of multiplex, size 44 x 20 x 25.2´´.
KLST-2 has 30 strings tuned in c and 30 in C. It is made out of multiplex, size 56 x 24 x 32´´.
Including: Tuning key, tuner, some replacement strings.
Singing Chair / Soundchair
designed by Ingo Böhme
About us
Ingo Boehme has been an innovative music instrument builder and designer for many years starting in 1982 with
the large wooden bass drums and adding string instruments in 1994. The music instruments have been used worldwide in wellness, Therapy, Pedagogic and by people who want to make intuitive music.
In 2003 Martina Glaeser-Boheme has joined the feeltone team focusing on the practice-oriented work with the instruments. With a background in Massage therapy and working together with other Sound Massage practitioners,
she has been developing her own form of working with Sound and the feeltone line of sound furniture’s.
Would you like to learn more on how to work with our different feeltone sound furniture’s: Monochord Tables, Soundwave,Singing Chair and Monochords?
We are offering a variety of trainings from a one-day introduction to the monochord to a 4 day training to
deepen your work. Contact us for more details.
2
Transportation wheels for KLLST-2
For better transportation we worked two wheels into the rear feet of the big chair. You can just
tip over the chair and roll it away. But, please never do it with a person inside, because the
wheels are not made for that kind of weight.
Accessories
ARM, pair armrests for KLST-1 and KLST-2, 14 x 6.8 x 4.8‘‘
The armrests support the arms and the palm of the hands can rest on the balls.
This allows the vibration from the chair to be transfered and to stimulate the hands.
These armrests are simply put on the sides of the chair (for both models KLST-1 and KLST-2)
and can be moved any way and position. It is recommended to tighten them completly after
you have the most comfortable place for the armrests. They are screwed tight with both screw
balls at their side. The vibration is transfered very good.
This compact and easy to use tuner encompasses the whole range of tones from C1 (32,70Hz) to C8 (4186,01Hz) .
Our recommendation for the tuning is to set the tuner to 432 or 440 Hz (a).
If the tuner is set an another frequency you can change the frequence by pressing the button (d).
This tuner works best when used in a low noise environment.
This tuner displays the notes like this: C,D,E,F,G,A,B, no matter which octave .
For example c‘ and c will be displayed as „C“.
(a) (b) (c) (d) (on/off)
The tuner
The included tuner is designed to be used in a silent environment. If you have to tune in a noisy
environment we recomment a clipon tuner (CA-AW3G) or a contact microphone (CA-CM200).
This allows you to tune independent of the noise level around you.
Both are not included and can be purchased through feeltone.
Recommended tuning c:
20 (30) overtone string c
20 (30) braided bass string C
The strings can be tuned a full tone higher or lower than the recommended base tone c (b,c,d)
Loading...