Fedora C2 Instruction Manual

Instruction manual

Contents

1. Guideline for safe use

(1) Symbols for special attention

(2) Conditions of child for application

(3) Conditions of seat and belt for fitting

(4) Cautions

2. Parts list

3. Operation method

(1) Buckles

(2) Adjusting the back rest angle

(3) Headrest

(4) Harness belts

(5) Adjusting harness belt
(6) Separation for use in the Junior Mode

(7) Separation for use in Booster Mode

4. Installation in the vehicle

(1) Child Mode

(2) Junior Mode

(3) Junior (booster) Mode

5. Separation/replacement of seat

6. Cleaning and maintenance

7. Warranty

This product is a child protection device to reduce the impact at the time of traffic accident.
However, this product cannot protect the child 100% from accident of any case. Safe driving is
absolutely required to prevent accident.

1. Symbols for special attention

For safe use of the product, essential points to be kept are marked with the following symbols.
These are safety precautions which should be strictly kept.

Danger

Improper handling may cause the user high level of danger including death or heavy injury and an
absolute emergence.

Warning

Improper handling may cause he user high risk of danger including death or heavy injury.

Caution

Improper handling may cause the user the risk of injury or property damage.

Warning

Please be well-acquainted with the user instructions before fitting and using in order to secure
correct fitting and efficient use of the product.

1. Guideline for safe use

1. Guideline for safe use

2. Conditions of child for application

This safety device is designed to be used for child weighing between 9kg ~36kg.
Child that does not meet the following conditions should not use the product.

Warning

Mode Conditions of child for application

other condition

Child mode

Weight : 9kg~18kg (w2)

Age for reference: 12months~4 years

When the baby is seated,

back of its head should be within the backrest.

Junior Mode

Junior Mode

(booster)

Weight : 15kg~25kg (w3)

Age for reference: 4 years~7 years

Use after removing harness belts

from child car seat

Weight : 22kg~36kg (w4)

Age for reference: 7 years~11years

Use after removing the backrest

from child car seat

3. Conditions of vehicle seat and belt for installation

It is recommended to install on the back seat in consideration of child safety.
Below pictures are examples of installation. Install securely by using vehicle safety belt.

Back seat (vehicle proceeds to the arrow direction)

Front seat (vehicle proceeds to the arrow direction)

Danger

Do not use the child restraint on the front passenger seat equipped with an airbag.

Blow-up of airbag may cause death or fatal injury to child.

Install the car seat in forwarding facing only using 3-point car safety belt.

1. Guideline for safe use

Do not install the product in the following vehicle safety belts and seats.

Vehicle seat without safety belt (unable to fit the child restraint)
Seat equipped with airbag (Blast of airbag may cause death or serious injury to child)
Side seat or seat in reverse direction from the vehicle direction (Shock absorption is difficult in

case of collision)
Seat with depth of less than 45cm (Child restraint installed becomes unstable.)

Seats that hinders safe driving by fitting child harness or front-center seat (for safety of passengers
in case of emergency)

Seat with safety belt fitted in the middle of the seat (unable to firmly fix the child restraint) / picture ①

Vehicle safety belt buckle is positioned too high. (Unable to fix child restraint)/ picture②

Seat with 2-point safety belt (unable to fix child restraint)/picture ③
Seat with 3-point safety belt with rewinding device on lap belt / picture④

(Regular 3-point safety belt has fixed lap belt)
Other examples of seats to which child car-seat is unable to fix/picture ⑤

Seat equipped with airbag
Side seat and reverse seat

from the vehicle proceeding
direction

Seat that hinders safe driving
by installation or front-center
seat
In case the belt is not 3-point
system

1. Guideline for safe use

Warning

This product is a regular child restraint which is suitable for designated standard form of vehicle seat.
However, there are some vehicle belts with which child car seat is unable to be securely fastened, in
which case the product should not be used. Unstable fitting may cause life-threatening injury as a
result of unstable child restraint and insufficient effect in case of collision or sharp braking. For further
questions for clarification, please ask the shop where you purchased the product or our customer
service hotline.

4. Cautions

Warning

Make sure that the child is with the protector when child is in the vehicle. Do not leave the vehicle
with the child placed on the child seat. Temperature gets very high inside the vehicle in the summer
or by hot weather, which may cause death to the child left in the vehicle.

Do not use the child restraint that has been subject to violent stress in an accident. This may be
ineffective and risky in case of emergency. Make sure of using the new product.

Child restraint should be firmly fastened at all times for safety purpose even when the child is not
placed, otherwise the child seat may be moved by collision or sharp braking that may cause
unexpected accident. Also, do not stack objects on the child car seat.

Do not install the product on the front seat of vehicle with two or three doors or on the seat that may
hinder entranc to the rear seat of the vehicle, if rear seat is used for passenger(s) Installation of these
cases may obstruct emergency evacuation and cause danger.

Vehicle safety belt and the harness belt should be kept undamaged in order to be fully effective in case
of an accident. Any damaged belt should not be used and should be replaced with new belt.

Do not unfasten the buckle when a infant is placed on the restraint, otherwise the infant may be put to
danger of having life-threatening injury in case of an accident.

Care needs to be taken in order for the child not to unfasten the belt or come out of the belt by mistakenly
pressing the buckle button of the vehicle safety belt or harness, otherwise life-threatening injury may
occur in case of an accident.

Direct sunlight to the product may cause a burn by touching the metal or plastic part of the product.
Check and make sure that the metal or plastic part of the product is not hot before using.

Do not adjust the child restraint while driving, otherwise it hinders safe driving and could cause unexpected
accident.

Installation of the product on the passenger seat may hinder operating speed gear or hand brake.
In this case, install the product in the rear seat.

Do not let the child standing, bending back or sitting on its knees in the child seat while driving or stopping,
otherwise child will be xposed to danger of getting injured by falling from child seat.

When the product is fastened by the vehicle safety belt, child seat may become unstable because of the
loosened vehicle safety belt while in use. Therefore, routine check is required and install again in case the
vehicle safety belt is loosened. Using the child seat with loosened vehicle belt may be ineffective and cause
danger in case of an accident.
(Checking and installation should be done in a safe condition)

1. Guideline for safe use

Warning

Caution

Do not release the child from child seat while driving in order to avoid life-threatening fatal injury
to child.

Do not allow the child to lean onto the front door in case the vehicle is equipped with SRS side
airbag in the front seat. Inflation of side airbag may case life-threatening fatal injury.

Do not give any hard or sharp object to infant while placed on the seat, otherwise life-threatening
fatal injury may be caused by small impact to the vehicle.

Do not use the child seat with the cushion or mat laid on the vehicle seat. Do not use the cushion
for the purpose of adjusting child seat.

In case the buckle is not securely fastened because of jammed inlet, please contact the shop where
the product was purchased or customer service hotline for repair.

Do not install the product in other manner than instructed in the manual. Incorrect installation may
cause insufficient effect followed by fatal injury at the time of collision.

Do not take out outer fabric or cover for other purpose of use.
Do not replace the outer fabric or cover with other material than designated.
Do not leave the objects liable to cause injury unsecured in the vehicle, otherwise infant may be hit

or get injured.
Do not disassemble the product in the manner other than instructed in the manual, use with

component(s) missing, or replace/modify with parts other than designated, otherwise it may cause
insufficient effect followed by fatal injury in case of collision.

This child seat is customized for vehicle, and not for home use.
Do not leave the child seat outside for a long time in order to prevent the seat from weakening of

its functions.
Do not spill food or drink on the child seat in order to prevent malfunction..

Do not get any part of the child seat jammed by vehicle seat or door in order to prevent the risk of
breakage or damage of child car seat.

2. Parts list

Back part

Head cushion

Shoulder belt guide

Slot harness strap

Child seat base

Shoulder pad

Harness buckle

Buckle pad

Lap belt guide
Harness adjuster lever

Reclining knob

Harness adjuster strap

Shoulder belt slot

Belt guide slot

Belt guide slot

Harness yoke

Fastener

Fixed axis