Federal Signal Corporation QL43, QL73, QuadraFlare DOT Installation And Service Instructions Manual
25500354
Rev. A0 0916
Printed in U.S.A.
© Copyright 2016 Federal Signal Corporation
Model QuadraFlare® DOT
Warning Lights
Installation and
Service Instructions
Para ver este manual en español,
visite www.fedsig.com
2
Model QuadraFlare DOT
Figures
Figure 1 Exploded Assembly View ............................10
Figure 2 Mounting Hole Locations ..............................11
Tables
Table 1 Wire Functions .................................................4
Table 2 Kit Contents List ...............................................4
Table 3 Replacement Parts ...........................................9
Table 4 Hole Patterns ...................................................11
Contents
Safety Message to Installers ........................................3
Overview of the QuadraFlare........................................4
Unpacking the QuadraFlare..........................................4
Kit Contents List ............................................................4
Installing the QuadraFlare ............................................5
Wiring the QuadraFlare .................................................6
Safety Message to Operators .......................................7
Cleaning the QuadraFlare .............................................8
Getting Technical Support ............................................8
Getting Repair Service ..................................................8
Replacement Parts ........................................................9
3
Installation and Maintenance Instructions
Model QuadraFlare DOT
Safety Message to Installers
People’s lives depend on your proper installation of our products.
It is important to read, understand and follow all instructions
shipped with the products. In addition, listed below are some other
important safety instructions and precautions you should follow:
• To properly install this light, you must have a good
understanding of automotive electrical procedures and
systems, along with prociency in the installation and use of
safety warning equipment.
• DO NOT install equipment or route wiring or cord in the
deployment path of an airbag.
• If a vehicle seat is temporarily removed, verify with the
vehicle manufacturer if the seat needs to be recalibrated for
proper airbag deployment.
• When drilling into a vehicle structure, be sure that both sides
of the surface are clear of anything that could be damaged.
• Locate the light control so the VEHICLE and CONTROL can
be operated safely under all driving conditions.
• Do not attempt to activate or deactivate light control while
driving in a hazardous situation.
• This product contains high intensity LED devices. To prevent
eye damage, DO NOT stare into the light beam at close range.
• Frequently inspect the light to ensure that it is operating
properly and that it is securely attached to the vehicle.
• File these instructions in a safe place and refer to them when
maintaining and/or reinstalling the product.
Failure to follow all safety precautions and instructions may result
in property damage, serious injury, or death to you or others.
4
Installation and Maintenance Instructions
Model QuadraFlare DOT
Overview of the QuadraFlare
The Federal Signal QuadraFlare DOT Warning Light is a selfcontained, high intensity, LED light designed for mounting to the
exterior of a vehicle. All models are available in a variety of colors
and are to be driven by an external asher. All units are designed
to work with Federal Signal ashers. Refer to the particular
asher instructions for proper wiring. Model QuadraFlare DOT
Warning Light is designed for operation on 12 Vdc at 2.0 A. The
QuadraFlare DOT Warning light may be available in dual color
models.
NOTE: All warning light units should NOT be considered for
steady burn applications.
Table 1 Wire Functions
Models Red White
Warning Color 1 Color 2
BTT Brake/Turn Tail
Reverse Reverse N/A
Unpacking the QuadraFlare
After unpacking the light, inspect it for damage that may have
occurred in transit. If the unit has been damaged, do not attempt
to install or operate it. File a claim im mediately with the carrier,
stating the extent of damage.
Kit Contents List
Table 2 Kit Contents List
Qty. Description Part No.
4 #6 x 2.0" Screw, S.S 7000A404-32
4 Rivet nut, Rubber, #6-32 70900417
Loading...