Federal Industries SN-4HD User Manual
ITEM: PROJECT NAME: DATE:
SERIES ‘90
HOT DELI CASE
MODEL l SN- 4HD
l SN- 6HD
Series ‘90. The ultimate merchandiser with advanced styling for maximum visual appeal.
Cases are available in lengths of 4' and 6'. Designed for continuous case line-ups.
STANDARD FEATURES
• Designed for wet or dry heat.
• Lift-up pneumatic, cylinder-assisted, double-curve
tempered front glass.
• Four-point leveling system.
• Removable sliding rear glass doors with moisture vent
panels. Doors are sloped for product access.
• All-welded base construction with a choice of six
standard laminates on base. Other nishes optional.
• Double-bend tempered front glass reduces glare from
outside lighting.
• Base trim: specify white, black, or stainless.
• End glass trim: specify white or black.
• Case height is only 48" high allowing better interaction
between the customer and the sales clerk.
• Rear wrapping board.
• Appliance receptacle provided on the back of the case
for a cash register, scale.
• Heating wells are one-piece stainless steel. Each well
is heated with its own cal-rod heating element and is
controlled by its own thermostat. Each well has a drain
and valve and holds a full-size pan and a third.
• Top-mounted, full-length infrared heater provides uniform
product temperature. Incandescent lighting provides even
product illumination.
• Moisture vents on the rear doors and a forced air front
glass defogger prevents excess moisture build-up.
• Interior – stainless steel.
• To ll the pans with water, a exible ll hose is provided
with a connecting 1/2" NPT water pipe tting.
• UL Safety and NSF Listed.
OPTIONAL ACCESSORIES:
l Special Base Finish
l Base Trim Specify White,
Black, or Stainless
l End Glass Trim Specify
White or Black
l Legs
l Cord and Plug (Six Foot)
l Front Package Shelf
With or Without Light Below
l Reective End Glass
SERIES ‘90 HOT DELI CASE
l Mirrored Interior Ends
With Laminated Exterior
l Reective Rear Doors
l Front Glass and Rear
Door Locks
l Top Service Shelf
(Stainless Steel or Glass)
l Scale Stand
SPECIFICATIONS:
Model Dimensions Shipping *AMPS Drain **Wells
L W H Weight 120/208-240/60/1
(lbs) 3 Wire Plus Ground
l SN- 4HD 48 1/4" x 37 3/4" x 48 1/2" 625 30 1" NPT 3
l SN- 6HD 77 1/4" x 37 3/4" x 48 1/2" 685 45 1" NPT 5
*Plus general purpose receptacle 120V, 15AMP.
**Each well holds a full-size pan and a third. The SN-6HD center well holds a full-size pan only.
• Due to continuing engineering improvements, specications are subject to change without notice.
FEDERAL INDUSTRIES
A Standex Company
215 FEDERAL AVENUE, BELLEVILLE, WISCONSIN 53508-9201
PHONE: 800-356-4206 FAX: 608-424-3234
EMAIL: geninfo@federalind.com WEBSITE: www.federalind.com
7/12
Loading...