Document Number:
MAN – FDPWRU28-2
Rev:
C
Revision Date:
08/27/2014
Page 1 of 16
© 2015 Flight Display Systems.
All Rights Reserved.
TECHNICAL SUPPORT
470-239-7421 or FlightDisplay.com
Installation and Operation
Manual
FD101DD-BH
FD101DDARM-ML
Dual 10.1” Widescreen LCDs
Document Number:
MAN – FDPWRU28-2
Rev:
C
Revision Date:
08/27/2014
Page 2 of 16
© 2015 Flight Display Systems.
All Rights Reserved.
TECHNICAL SUPPORT
470-239-7421 or FlightDisplay.com
FD101DD-BH (Bulk Head)
FD101DDARM-ML (ARM)
Dual 10.1” Widescreen LCDs
© 2014 Flight Display Systems. All Rights Reserved.
Flight Display Systems
6435 Shiloh Road
Alpharetta, GA 30005
470-239-7400 Phone
678-867-6742 Fax
sales@FlightDisplay.com
www.FlightDisplay.com
For the most current copy of all product manuals, please visit our website at
www.FlightDisplay.com
For additional support, please visit our Frequently Asked Questions section located on
our web site Support Center at http://support.FlightDisplay.com.
Document Number:
MAN – FDPWRU28-2
Rev:
C
Revision Date:
08/27/2014
Page 3 of 16
© 2015 Flight Display Systems.
All Rights Reserved.
TECHNICAL SUPPORT
470-239-7421 or FlightDisplay.com
Table of Contents
General Information ...................................................................................................................4
Front View ...................................................................................................................................4
Required Hardware ...................................................................................................................5
Specifications .............................................................................................................................6
Installation Instructions ..........................................................................................................6
Power ...........................................................................................................................................6
Video Wiring Suggestions ........................................................................................................6
Power and Ground Wiring .......................................................................................................6
Wiring Instructions ...................................................................................................................7
Pinout ...........................................................................................................................................8
Operations Instructions ...........................................................................................................9
Monitor Button Controls ...........................................................................................................9
FAQ ............................................................................................................................................10
Technical Drawing..................................................................................................................11
Technical Drawing on ARM .................................................................................................12
Troubleshooting ......................................................................................................................13
Technical Support ...................................................................................................................14
Instructions for Continued Airworthiness ........................................................................14
Warranty ...................................................................................................................................15
Log of Revisions ......................................................................................................................16
General Information
The FD101DD-BH is a special mission 10.1” dual widescreen LCDs. This monitor has
been designed with two embedded high resolution screens. Both top and bottom
monitors, display an HDSDI input; When paired with the FDCONV-HDSDI-D additional
inputs can be used and selected via the toggle switches on the side of the display.
Document Number:
MAN – FDPWRU28-2
Rev:
C
Revision Date:
08/27/2014
Page 4 of 16
© 2015 Flight Display Systems.
All Rights Reserved.
TECHNICAL SUPPORT
470-239-7421 or FlightDisplay.com
Front View
FD101DD-BH
(Bulk Head Installed)
Required Hardware
FDCONV-HDSDI-D Converter(sold separately)
FD101DDARM-ML
Document Number:
MAN – FDPWRU28-2
Rev:
C
Revision Date:
08/27/2014
Page 5 of 16
© 2015 Flight Display Systems.
All Rights Reserved.
TECHNICAL SUPPORT
470-239-7421 or FlightDisplay.com
J1
VGA Input (CH 1)
J2
COMP Input
J3
HDMI Input (CH 1)
J4
HDSDI Input (CH 1)
J5
HDSDI Output/Power Input
J6
VGA Input (CH 2)
J7
HDMI Input (CH 2)
J8
HDSDI Input (CH 2)
Document Number:
MAN – FDPWRU28-2
Rev:
C
Revision Date:
08/27/2014
Page 6 of 16
© 2015 Flight Display Systems.
All Rights Reserved.
TECHNICAL SUPPORT
470-239-7421 or FlightDisplay.com
Specifications
Display Type
10.1” TFT Color LCD- Dual
Supported Resolutions
1920x1080i
Native Resolution
1024x600
Display Brightness
300 cd/ m2
Dimensions (including the ARM)
14.50”(W) x 15.05”(H) x 2.59”(D)
LCD Dimension
9.80”(W) x 12.10”(H)
Weight
5 lbs
Power
12VDC @ .6 Amps
Operating Temperature
0-50° C (32-122° F)
PC & Video Inputs
HD-SDI
Installation Instructions
The FD101DDARM-ML, should be installed on a non-essential bus and have a dedicated
circuit breaker. It is a requirement that a switch be installed in the cockpit so that the pilot
can de-energize the system should it become necessary.
Power
This is a 12VDC monitor that requires 0.6 Amps of power to operate. Power is provided
from the FDCONV-HDSDI-D.
Video Wiring Suggestions
All shields should be floating at the converter and display.
Avoid routing video wiring parallel to:
AC wiring
Strobe wiring
DC motor supply cables
Inverter cabling
Or any other potential noise source.
Power and Ground Wiring
22 AWG wire is recommended for Power and Ground applications.
Document Number:
MAN – FDPWRU28-2
Rev:
C
Revision Date:
08/27/2014
Page 7 of 16
© 2015 Flight Display Systems.
All Rights Reserved.
TECHNICAL SUPPORT
470-239-7421 or FlightDisplay.com
Pin
Number
Description
1
N/C
2
N/C
3
12VDC Power IN
4
12VDC Power Return
5
N/C
6
N/C
7
N/C
8
Source Select (Converted/Loop
Out) CH1 (BOTTOM DISPLAY)
9
Source Select (Converted/Loop
Out) CH2 (TOP DISPLAY)
10
N/C
11
N/C
12
N/C
13
N/C
14
N/C
15
N/C
A1
HDSDI IN CH1
(BOTTOM DISPLAY)
A2
HDSDI IN CH2
(TOP DISPLAY)
Pin
Number
Description
1
28VDC Power IN
2
28V Power Return
3
12VDC Power OUT
4
12VDC Power Return
5
N/C
6
CH1 Source Select Common
7
CH2 Source Select Common
8
Source Select (Converted/Loop
Out) CH1
9
Source Select (Converted/Loop
Out) CH2
10
CH1 Source Select VGA
11
CH1 Source Select Composite
12
CH1 Source Select HDMI
13
CH2 Source Select VGA
14
CH2 Source Select Composite
15
CH2 Source Select HDMI
A1
HDSDI OUT CH1
A2
HDSDI OUT CH2
Wiring Instructions
When connecting the FD101DDARM-ML to the FDCONV-HDSDI-D(see diagram below):
Pinout for FD101DDARM-ML Pinout for J5: HDSDI Input/Power Input
Document Number:
MAN – FDPWRU28-2
Rev:
C
Revision Date:
08/27/2014
Page 8 of 16
© 2015 Flight Display Systems.
All Rights Reserved.
TECHNICAL SUPPORT
470-239-7421 or FlightDisplay.com
PIN
NUMBER
DESCRIPTION
A1
TOP DISPLAY - HDSDI INPUT
A2
BOTTOM DISPLAY - HDSDI INPUT
1
N/C
2
N/C
3
12 VDC (FROM FDCONV-HDSDI-D)
4
12 VDC RETURN (FROM FDCONVHDSDI-D)
5
N/C
6
N/C
7
N/C
8
COMP/HDSDI SOURCE SELECT (TOP
DISPLAY)
9
VGA/HDSDI SOURCE SELECT (BTM
DISPLAY)
10
N/C
11
N/C
12
N/C
13
N/C
14
N/C
15
N/C
P5 - 17W2 Combo-D Receptacle (Supplied w/ RG179 contacts)
Connector Conec P/N: 3017W2SCM99A10X
Coax Contacts Conec P/N: 132J30019X
Signal Contacts Solder Cups
Document Number:
MAN – FDPWRU28-2
Rev:
C
Revision Date:
08/27/2014
Page 9 of 16
© 2015 Flight Display Systems.
All Rights Reserved.
TECHNICAL SUPPORT
470-239-7421 or FlightDisplay.com
Operation Instructions
BUTTON
FUNCTION
DESCRIPTION
1
Rocker
Switch
This rocker switch, allows the user to switch
the 10” LCD between the input sources.
2
P
Power monitor on and off.
3
M
Press to access menu options. The menu is
a toggle button. Press to enter the menu
display, press again to exit.
4
S
Press to select/scroll through the menu
options.
5
Press to scroll down/decrease the selected
menu option.
6
Press to scroll up/increase the selected
menu option.
Monitor Control Buttons
Top & Bottom Monitor:
Document Number:
MAN – FDPWRU28-2
Rev:
C
Revision Date:
08/27/2014
Page 10 of 16
© 2015 Flight Display Systems.
All Rights Reserved.
TECHNICAL SUPPORT
470-239-7421 or FlightDisplay.com
Frequently Asked Questions
How do I navigate through the menus?
Use the Menu button to open the menu. Use the Select button to chose the applicable menu page,
and press Up to enter the selected menu page. Use the Select button to scroll through the options,
and then use the Up and Down buttons to increase or decrease the options’ values.
(Accessed from System menu)
Document Number:
MAN – FDPWRU28-2
Rev:
C
Revision Date:
08/27/2014
Page 11 of 16
© 2015 Flight Display Systems.
All Rights Reserved.
TECHNICAL SUPPORT
470-239-7421 or FlightDisplay.com
Technical Drawing
Document Number:
MAN – FDPWRU28-2
Rev:
C
Revision Date:
08/27/2014
Page 12 of 16
© 2015 Flight Display Systems.
All Rights Reserved.
TECHNICAL SUPPORT
470-239-7421 or FlightDisplay.com
Technical Drawing
Document Number:
MAN – FDPWRU28-2
Rev:
C
Revision Date:
08/27/2014
Page 13 of 16
© 2015 Flight Display Systems.
All Rights Reserved.
TECHNICAL SUPPORT
470-239-7421 or FlightDisplay.com
Troubleshooting
Snow or Sweeping Lines
Lines that slowly sweep up and down are a result of AC noise. This AC noise can be
generated by a power cart on the aircraft. Take the power cart off of the aircraft. Be careful
of inverter wiring, which can also cause noise. Stand off the wires, if necessary.
If snow or sweeping lines persist, it is possible that the ground is at an incorrect point in
the aircraft. Try moving the ground to another location.
No power to Monitor, or No video Input
• Verify correct wiring. Check the base receptacle connectors for possibly damaged pins.
• Check that the video source is:
1. Powered on,
2. In Play mode, and
3. Displaying video.
Color Distortion
• Adjust brightness and contrast settings using the buttons on the monitor.
Document Number:
MAN – FDPWRU28-2
Rev:
C
Revision Date:
08/27/2014
Page 14 of 16
© 2015 Flight Display Systems.
All Rights Reserved.
TECHNICAL SUPPORT
470-239-7421 or FlightDisplay.com
Technical Support
Should you have any questions concerning this product or other Flight Display Systems
products, please contact our Product Support representatives at (470) 239-7421.
Flight Display Systems
6435 Shiloh Road
Alpharetta, GA 30005
Phone: 470-239-7400
Fax: 678-867-6742
Email: sales@FlightDisplay.com
For further product information, technical data and sample wiring diagrams, please click on
the Dealers section of our web site at www.FlightDisplay.com
Instructions for Continued Airworthiness
The FD101DD-BH/FD101DDARM-LM are not designed to require regular general
maintenance.
Document Number:
MAN – FDPWRU28-2
Rev:
C
Revision Date:
08/27/2014
Page 15 of 16
© 2015 Flight Display Systems.
All Rights Reserved.
TECHNICAL SUPPORT
470-239-7421 or FlightDisplay.com
Warranty Information
All Flight Display Systems (FDS) products are warranted to be free from material or manufacturing defects for a
period of 24 months from the date of shipment for General Aviation customers or 12 months from the date of
shipment for Government/Special Mission customers. Any material or repair workmanship for in warranty repair
service will be specifically warranted for 90 days or the remainder of the original warranty period, whichever is
longer. If the original warranty period has expired, the 90 day repair warranty is limited to the material and
workmanship specific to the repair activity completed.
The following conditions are exclusions to warranty coverage:
1. Labor costs associated with installation, removal or reinstallation of any product.
2. Damage to or malfunction caused by any unauthorized alteration made to the product.
3. Resolving signal quality issues caused by externally generated noise introduced by aircraft electrical
systems or other components connected to any FDS product.
4. Any malfunction caused by improper installation or connection to aircraft wiring, industry standard cabin
management/ inflight entertainment systems, or third party commercial equipment not specifically identified
as compatible with FDS products.
5. Any malfunction caused by installation that does not conform to precautions associated with operating
environments listed in the operating manual or consistent with industry best practices such as; high
temperature, adequate ventilation, high humidity, high dust, or power surges.
6. Cosmetic damage or damage to internal components caused by installation or removal, failure to follow
installation or operating instructions, or any neglect or misuse of the product.
7. Any product that is returned for service with a broken tamper evident seal, indicating tampering or improper
handling of the product by an unauthorized person. Violation of product tamper evident seals or
modification of factory installed serial and PMA labels voids any warranty, either expressed or implied.
The FDS technical support team is available to provide distance troubleshooting support during business hours
(8:00am to 5:00pm EST) Monday through Friday at (470) 239-7421.
Many repair requests can be resolved through distance support and may not require return of merchandise to the
factory. If a product must be returned to the factory for repair, an RMA number will be issued as directed by the
technical support team and communicated by the repair coordinator.
Upon request by the customer, FDS may send a service technician onsite to repair any non-PMA products. The
travel expenses incurred to include transportation, lodging and meals along with the technician’s hourly rate shall
be payable by the customer in accordance with FDS’ applicable rates and procedures.
Flight Display Systems will, upon receipt of returned merchandise, remanufacture or replace the unit at our
discretion and return the product by Ground Return Shipping. Express return shipment will be the responsibility of
the sender.
This warranty is not transferable.
Any implied warranties expire at the express limited warranty expiration date. FDS shall not be held liable for any
indirect, special, punitive, incidental or consequential damages.
Some states do not allow limitation on the length of an implied warranty. In such states, the exclusions or
limitations of this limited warranty may not apply.
Document Number:
MAN – FDPWRU28-2
Rev:
C
Revision Date:
08/27/2014
Page 16 of 16
© 2015 Flight Display Systems.
All Rights Reserved.
TECHNICAL SUPPORT
470-239-7421 or FlightDisplay.com
Rev
Date
Page
Description
A
03/10/2014
Initial Release
Log of Revisions
Loading...