FAVI BLED3TPPWM3HD100-BH, BLED4TPWM3HD100-WH User Manual
User Manual
Product specification and user manual is subject to change without prior notice due
to engineering improvement. Color and appearance of product and icons in user
manual may vary from that of actual product.
TABLE OF CONTENTS
Product Registration 01
Warranties 02
Important Safety Notes 03
Safety 03
Maintenance 03
Power Projector 04
Turn ON Projector 04
Turn OFF Projector 04
Projector Overview 05
Focus Adjustment 05
Input Panel Layout 06
Keystone Adjustment 07
Top Control Panel Layout 08
Remote Overview 09
Installation 10
Image Adjustment 11
Installation Methods 12
Menu Setting 13
Main Menu Overview 13
Settings Menu 13
Sound Menu 14
Time Menu 14
Picture Menu 15
Multimedia Menu 16
Troubleshooting 17
PRODUCT REGISTRATION
Thank you for your purchase. To better serve you in
the future, please take a moment to register your
product at:
www.favientertainment.com/support
Product Registration allows us to send you important
updates, service information and helpful hints. It will
also make it easier should you ever need to contact
our Support Team.
FAVI values your privacy and will never share your
information with other companies.
1
WARRANTIES
Your projector is warrantied to be free of defects in material
and workmanship for a period of 1 year from the date of receipt.
Should your projector develop an issue requiring it to be
repaired within this time frame, we will repair or exchange any
defective unit at no cost to you.
FAVI Entertainment will pay round trip shipping for warranty
claims within the USA. Excludes: HI, AK, APO, USA Territories,
and international orders.
Our parts warranty is valid up to one year from the date of
receipt. We will bill you a flat rate for repair and shipping costs
before accepting the unit back for repair. You will not be billed
for the cost of replacement parts. The above warranties will be
considered null and void in the event of damage caused by
misuse, neglect, improper handling, or improper installation.
FAQ’s, and other support information can be found at:
http://www.favientertainment.com/support
For technical support, you may contact us at:
techsupport@favientertainment.com
2
IMPORTANT SAFETY NOTES
Before you use this projector, please read this manual carefully.
SAFETY
• Do not stare directly into the light of projector’s lens.
• Do not expose projector to water or other sources of
moisture to avoid electrical shock.
• Do not use projector in areas where flammable gases or
fumes are present.
• Do not expose projector to extreme temperatures.
MAINTENANCE
• Use only the supplied power cable to power projector.
Using other adapter may damage the projector.
• When cleaning projector, remove power cable and use a
damp cloth.
• When not using projector, cover lens with lens cover to
keep dirt and dust from getting on the lens.
• Place projector on stable surfaces.
• Do not attempt to disassemble projector. Doing so will void
your warranty.
3
POWER PROJECTOR
Starting up your projector for the first time:
Step 1: Insert two AAA batteries into
the remote control.
Step 2: Press the power button on the
remote or on the projector.
Note: The projector lamp should light up within a few seconds. The focus and
keystone correction may need to be adjusted. Please see Projector Overview >
Keystone Adjustment. After the necessary adjustments are made, your projector
will be ready to use.
Powering down your projector:
Step 1: When the projector is on, press the
power button on either the remote
or the projector to turn it off.
Note: The projector will not completely shut down at once. The projector will first
enter shut down mode, where the green indictor light will turn red, before
completely shutting down. You will not be able to turn the projector back on during
shut down mode. It is recommended to let at least 15 minutes pass before turning
the projector back on. Rapid powering on and off cycles will shorten the life of your
projector’s lamp.
4
Loading...